ANZSCO 3241 车身修理工 Panelbeaters - FLYabroad

fcgvisa · 2015年09月03日14:48

ANZSCO 3241 车身修理工 Panelbeaters - FLYabroad

ANZSCO 3241 车身修理工职责概述 - FLYabroad

修复车辆的金属、玻璃纤维和塑料车身的损坏，更换车身。 PANELBEATERS repair damage to metal, fibreglass and plastic body work on vehicles, and form replacement vehicle panels.

ANZSCO 3241 车身修理工技能要求 Indicative Skill Level - FLYabroad

本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
在澳洲：AQF证书3级，包括至少2年的在职培训或AQF证书IV级（ANZSCO技术3级）In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
在新西兰：NNZ资格证4级（ANZSCO技术3级）In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
有时除了资格证外，还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification
可能要注册或许可。Registration or licensing may be required

ANZSCO 3241 车身修理工主要职责 Tasks Include - FLYabroad

除去损坏的面板和部件，以及移走垫衬物和配件。 removing damaged panels and parts, and removing upholstery and accessories to gain access
通过锤击面板去除凹痕。 removing dents by hammering panels
使用机械和液压设备来校正损坏的车辆和零件。 straightening damaged vehicles and parts using mechanical and hydraulic equipment
用新的或二手面来更换严重损坏的部分。 replacing badly damaged sections with new or second-hand panels
用塑料填料填充凹陷处，锉削加工、研磨和磨光修复的表层。filling depressions with plastic filler, and filing, grinding and sanding repaired surfaces
使用焊接设备切割并连接更换部分。cutting and joining replacement sections using welding equipment
安装已修好的车身或更换车身；改装主体硬件更换面板，如门锁及装饰。 fitting repaired or replacement panels on vehicles and refitting body hardware such as door locks and trims
可能要协助车身制造厂建设和恢复特制的、过时的和其他特种车辆。may assist vehicle body builders in constructing and restoring custom-designed, vintage and other specialty vehicles
可能要为车辆喷漆。 may spray-paint vehicles

ANZSCO 3241 车身修理工职位列表 List of occupations - FLYabroad

324111 车身修理工 Panel Beater ###

替代职位 Alternative Title:
车身整修工 Vehicle Refinisher
修复车辆的金属、玻璃纤维和塑料车身的损坏，更换车身。Repairs damage to metal, fibreglass and plastic body work on vehicles and forms replacement vehicle panels.
可能要注册或许可。Registration or licensing may be required
技术级别 Skill Level: 3

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。

fcgvisa · 2015年09月05日08:29

在接下来5年里，截止到2019年11月，车身修理工的职位空缺预计会低于平均水平（5001 - 10000之间）。职位空缺包括就业增长和人员流动（人员流动指的是工人的换岗或者离职）
在过去5年中，此职业的就业情况处于强劲增长状态（按百分比计算），长期来看（10年）会缓慢下降。预计到2019年11月，车身修理工职业的就业将会下降。
这是一个需求量居中的职业（2014年11月的需求量为16600个），表明在部分地区就业机会有限。
车身修理工职位全职工作的比例高（为87.2%）。对于全职工作的车身修理工，每周平均工作 41.0小时（所有职位的平均小时为40.9），收入低于平均水平-在第4档。车身修理工职业的失业率处于平均水平。
车身修理工职业的最常见的教育水平为三级或四级水平，其中约占81.3%
车身修理工主要受雇于其他服务行业。

Over the five years to November 2019, the number of job openings for Panelbeaters is expected to be below average (between 5,001 and 10,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.

Employment for this occupation rose strongly (in percentage terms) in the past five years and fell slightly in the long-term (ten years). Looking forward, employment for Panelbeaters to November 2019 is expected to decline.

This is a medium sized occupation (16,600 in November 2014) suggesting that opportunities may be limited in some regions.

Panelbeaters have a high proportion of full-time jobs (87.2 per cent). For Panelbeaters working full-time, average weekly hours are 41.0 (compared to 40.9 for all occupations) and earnings are below average - in the fourth decile. Unemployment for Panelbeaters is average.

The most common level of educational attainment for Panelbeaters is Certificate III/IV (81.3 per cent).

Panelbeaters are nearly all employed in Other Services.

Key Indicators

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.