ANZSCO 3222 板金技工 Sheetmetal Trades Workers - FLYabroad

ANZSCO 3222 板金技工 Sheetmetal Trades Workers - FLYabroad

ANZSCO 3222 板金技工职责概述 - FLYabroad

  • 钣金工规划、定型并将钣金与其他材料相结合以制作产品和元件。 SHEETMETAL TRADES WORKERS mark out, shape, form and join sheetmetal and other materials to make products and components.

ANZSCO 3222 板金技工技能要求 Indicative Skill Level - FLYabroad

  • 本职业需要如下条件:Most occupations in this minor group have a level of skill commensurate with the qualifications and experience outlined below.
  • 在澳大利亚: In Australia:
  • AQF3级证书加2年以上在职培训或AQF4级证书(ANZSCO 3级水平)。 AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
  • 在新西兰: In New Zealand:
  • NZ4级注册证书(ANZSCO 3级水平)。NZ Register Level 4 qualification (ANZSCO Skill Level 3)
  • 三年以上相关经验可以代替上方所示正规资格。某些情况下,除了要求有正规资格还要求有相关经验和/或在职培训经历。需要注册或许可证。 At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.

ANZSCO 3222 板金技工主要职责 Tasks Include - FLYabroad

  • 研究图纸和说明书,以确定工作职责、需要的材料和设备 studying blueprints, drawings and specifications to determine job, material and equipment requirements
  • 选择金属原料,如不锈钢、镀锌铁、碳钢、铝、铜等,并检查仪器及其他金属原来的规格尺寸 selecting metal stock, such as stainless steel, galvanised iron, mild steel, aluminium and copper, and checking sizes, gauges and other dimensions of metal stock against specifications
  • 使用模板、仪表及其他计量器具标出金属材料的参照点和线条 marking out metal stock with reference points and lines, using templates, gauges and other measuring instruments
  • 根据使用指南用手动及电动剪、切纸机切割金属原料 cutting metal stock along guidelines using hand and power shears, guillotines and drills
  • 使用折叠和弯曲机、压路机、切割机和锤子切割定型成产品 shaping and forming cut metal stock into products using folding and bending machines, rollers, presses and hammers
  • 通过铆接、焊接、钎焊、铜焊和其他连接物等将组装元件为成品 fitting and assembling components into final products by welding, riveting, soldering, brazing and otherwise joining
  • 用抛光整理、锉削、打磨和清洁,对产品进行精加工 finishing products by polishing, filing, sanding and cleaning assembled products
  • 可能修复损坏的钣金产品和零件 may repair damaged sheetmetal products and components
  • 可能专门从事制造、或现场组装和安装钣金产品 may specialise in fabrication, or on-site assembly and installation, of sheetmetal products
  • 需要先进的绘图和计算技巧,来可能生产飞机的钣金零件 may produce aircraft sheet metal components requiring advanced drawing and calculating skills
  • 可能专职做装潢 may specialise in decorative copperwork

ANZSCO 3222 板金技工职位列表 List of occupations - FLYabroad

322211 钣金工 Sheetmetal Trades Worker

  • 将钣金与其他材料相结合以制作产品和组件 Marks out, shapes, forms and joins sheetmetal and other materials to make products and components.
  • 技能等级:3 Skill Level: 3
  • 职业方向: Specialisations:
  • 金属纺纱工 Metal Spinner
  • 钣金制模师 Sheetmetal Patternmaker

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。

  • 在接下来5年里,截止到2019年11月,钣金工职位空缺预计会低于平均水平(等于或少于5000)。职位空缺包括就业增长和人员流动(人员流动指的是工人的换岗或者离职)

  • 在过去5年中,此职业的就业情况处于小幅度增长状态(按百分比计算),长期来看(10年)处于相对稳定状态。预计到2019年11月,钣金工职业的就业将会适度增长。

  • 这是一个需求量小的职业(2014年11月的需求量为8800个),表明部分地区就业机会相当有限。

  • 钣金工职位全职工作的比例为100%,薪资处于平均水平-在第5档。钣金工职业的失业率高于平均水平

  • 钣金工职业的最常见的教育水平为三级或四级水平,其中约占60.6%

  • 钣金工主要受雇于制造业、建筑业和批发贸易等行业。

  • Over the five years to November 2019, the number of job openings for Sheetmetal Trades Workers is expected to be low (equal to or less than 5,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.
  • Employment for this occupation rose moderately in the past five years, remained relatively steady in the long-term (ten years). Looking forward, employment for Sheetmetal Trades Workers to November 2019 is expected to grow moderately.
  • This is a small occupation (8800 in November 2014) suggesting that opportunities may be quite limited in some regions.
  • 100 per cent of Sheetmetal Trades Workers work full-time and earnings are average - in the fifth decile. Unemployment for Sheetmetal Trades Workers is above average.
  • The most common level of educational attainment for Sheetmetal Trades Workers is Certificate III/IV (60.6 per cent).
  • Sheetmetal Trades Workers are mainly employed in Manufacturing, Construction and Wholesale Trade.

Key Indicators

Key Indicators graph - see table below for a summary

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.

3222 Job Prospects

3222 职业统计数据 Statistics

  • 周薪(税前)Weekly Earnings (before tax)

周薪(税前)Weekly Earnings (before tax)

  • 就业水平 Employment Level (thousands)

就业水平 Employment Level (thousands)

  • 增长比例 Recent Job Growth (per cent)

增长比例 Recent Job Growth (per cent)

  • 按性别计算就业增长 Employment Growth by Gender (thousands)

按性别计算就业增长 Employment Growth by Gender (thousands)

  • 性别比例 Gender (per cent share)

性别比例 Gender (per cent share)

  • 周工作小时数 Weekly Hours Worked

周工作小时数 Weekly Hours Worked

  • 年龄 Age Profile (per cent share)

年龄 Age Profile (per cent share)

  • 各州就业比例 Employment by State and Territory (per cent share)

各州就业比例 Employment by State and Territory (per cent share)

  • 所在行业 Main Employing Industries (per cent share)

所在行业 Main Employing Industries (per cent share)

  • 教育程度 Educational Attainment (per cent of employment)

教育程度 Educational Attainment (per cent of employment)

3222 职业找工作信息

数据来源: 及

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。