233999 其他工程专业人员 Engineering Professionals nec

飞出国论坛综合 ANZSCO
1

ANZSCO 233999 其他工程专业人员 Engineering Professionals nec - FLYabroad

233999 其他工程专业人员职业描述 Job description - FLYabroad

该类别包括其他未分类的过程技术人员 。可能需要注册或许可。

This occupation group covers Engineering Professionals not elsewhere classified. Registration or licensing may be required.

Previously referred to in ASCO as:
2129-79 Engineer - Building and Engineering Professionals (nec)

233999 其他工程专业人员职位别名 - FLYabroad

  • 233999 声学工程师 Acoustic Engineer (N)
  • 233999 机电一体化工程师 Mechatronics Engineer (N)
  • 233999 产品设计工程师 Product Design Engineer (N)

233999 其他工程专业人员技术等级 Skill level - FLYabroad

233999 其他工程专业人员所属职业列表 - FLYabroad

233999 其他工程专业人员澳洲技术移民职业评估 Skills assessment authority - FLYabroad

233999 其他工程专业人员州担保情况 - FLYabroad

近期担保过 233999 其他工程专业人员 Engineering Professionals nec 职业的州包括：

233999 其他工程专业人员新西兰技术移民紧缺职业加分要求 - FLYabroad

华盛顿协议认证的工学学位，或者
A Washington Accord accredited engineering degree
OR
相当于工学学位、荣誉工学学位或工学硕士的资格，或者
Either a qualification comparable to a:
Bachelor of Engineering, 
or Bachelor of Engineering (with Honours),
or Master of Engineering degree 
OR
7级或7级以上资格，此资格有IPENZ的信函，证明此学位符合新西兰对于特许专业工程师的注册要求，或者
A qualification at Level 7 or higher with a letter from IPENZ certifying
that the degree and any further learning meets the academic requirements for registration as a ‘Chartered Professional Engineer’ in New Zealand 
OR
在新西兰注册特许专业工程师
NZ registration as a ‘Chartered Professional Engineer’

233999 其他工程专业人员执业注册要求（不代表移民要求） - FLYabroad

Registration or licensing may be required.

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。

2

233999A 收入图示（Earnings） - 飞出国

233999A 职业全职从业者税前周薪比例（Income Range Per Week - Before tax）

Income of persons working full-time

233999A 职业全职与兼职从业者税前周薪比较（Income Based On Employment Status Per Week - Before tax）

Earnings of persons working full- and part-time

数据来源： abs.gov.au 及 myfuture.edu.au

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。

What’s it like to be a Mechatronic Engineer?

Mechatronic engineers design and maintain machinery with electronic and
computer control systems, such as aircraft, robots, motor vehicles, cameras,
power generators and mining and chemical plant machinery.

Workplaces range from laboratories and processing plants to engineering design
offices.

How much can I expect to earn?

Full-time employed Mechatronic Engineer earn an average of $1905 per week. The
[average annual salary for this job is $99060 excluding super.]

Personal requirements

  • enjoy technical and engineering activities
  • good communication skills
  • able to work as part of a team
  • able to think creatively and problem solve
  • interested in mathematics, physics and mechanical equipment, such as robotic and production equipment.

This job also involves:

Good vision for detail

These jobs require you to be able to see clearly to examine items close-up. It
covers jobs where poor vision e.g. tunnel vision, could make the work place
unsafe or the job difficult to undertake, e.g. draftsperson working with
detailed drawings; checkout operator reading dockets; work requiring good
hand-eye co-ordination for working with precision or semi-precision tools.

Mainly indoor work

Workers performing these jobs would usually be expected to spend more than
three-quarters of their day indoors, in an office, factory or other enclosed
area protected from the weather.

Reading or writing

These jobs require moderate or better reading and writing skills. Workers may
be expected to prepare, understand or act on written materials, such as
letters or reports. People may wish to avoid these jobs if their reading or
writing English skills are limited to a small range of words or phrases and
symbols. Jobs remaining may still require very basic reading or writing
skills.

This occupation offers jobs at the following skill levels:

Professional Jobs

Jobs in this group usually require completion of a recognised Bachelor Degree,
or extensive relevant experience. Some jobs also require post-graduate study,
such as a Graduate Certificate, Graduate Diploma or Master Degree.

Study requirements

At school, you can study these subject(s) to get a good foundation for this
occupation:

Chemistry

School subjects that include some aspects of CHEMISTRY provide a useful
background to these jobs. In some cases a chemistry-related subject is a pre-
requisite for entry to courses that provide the training for the job.

Industrial Arts

School subjects that include some aspect of INDUSTRIAL ARTS provide a useful
background to these jobs. In some cases an industrial arts-related subject is
a pre-requisite for entry to courses that provide the training for the job.

Mathematics

School subjects that include some aspect of MATHEMATICS provide a useful
background to these jobs. In some cases a mathematics-related subject is a
pre-requisite for entry to courses that provide the training for the job.

Physics

School subjects that include some aspect of PHYSICS provide a useful
background to these jobs. In some cases a physics-related subject is a pre-
requisite for entry to courses that provide the training for the job.

Duties and tasks of a Mechatronic Engineer

Mechatronic engineers may perform the following tasks:

  • design, develop, maintain and manage high-technology engineering systems for the automation of industrial tasks
  • apply mechatronic or automated solutions to the transfer of material, components or finished goods
  • apply advanced electronic control systems, which are usually computer-driven
  • design and assist with the manufacture of consumer products such as cameras and video recorders
  • apply electronic and mechanical processes and computers to tasks where the use of human labour may be dangerous (underwater exploration, mining or forestry, for example)
  • carry out studies into the feasibility, cost implications and performance benefits of new mechatronic equipment.
3

ANZSCO 233999 其他工程专业人员 Engineering Professionals nec - FLYabroad

新西兰技术移民2017年2月27日最新紧缺职业奖励加分项学历要求
Bonus point requirements in 27 Febuary 2017.

紧缺职业加分要求，需符合以下资格之一：

  • 荣誉工程学士（土木工程）（NZQF 8级）
  • 工程技术学士（土木工程）（NZQF 7级）
  • 工程技术学士（高速公路工程）（NZQF 7级）
  • 新西兰NZQF 7 学士或360学分以上的包含相关专业课程的更高学历，且为建筑管理或公路工程重点领域专业
  • NZQF 7 研究生或更高文凭，其中包括在建筑管理，公路工程或建筑项目管理重点领域专业得到新西兰研究生文凭。或者在土木工程，公路工程或施工管理重点领域专业得到新西兰NZQF 6 及以上文凭，最低240学分
  • 通过华盛顿协议或悉尼协议获得的土木工程本科（初级）工程学位（见附注）
  • 新西兰NZQF 7 及以上，可以通过IPENZ来函证明学位，任何进一步的学习符合特许专业工程师在新西兰土木工程领域注册的专业地位的要求，作为特许专业工程师或新西兰专业工程师学会的工程技术人员，至少有五年的相关职位工作经验

附注：当协议国的大学工程学士学位通过了华盛顿协议的认定，从通过的那一刻起或之后的某段时间内必须将经过认可的大学工程学士学位发放给签字国，除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定授予的大学工程学位是否符合华盛顿协议认证，请参阅国际工程联盟在其网站上的链接：
http://www.ieagreements.org/Washington-Accord/Accredited.cfm。

如果本科工程学位获得了悉尼协议的认证，从通过的那一刻起或之后的某段时间内必须将经过认可的工程学士学位发放给签字国，除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定获得的工程技术学位是否符合悉尼协议，请参阅国际工程联盟在其网站上的链接：
http://www.ieagreements.org/Sydney/signatories.cfm。

如果本科工程学位获得了首尔协议的认证，从通过的那一刻起或之后的某段时间内必须将经过认可的工程学士学位发放给签字国，除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定授予的IT学位是否符合“首尔协议”的认证，请参阅以下链接：

One of the following qualifications:

  • Bachelor of Engineering with Honours (Civil Engineering) (NZQF Level 8)
  • Bachelor of Engineering Technology (Civil Engineering) (NZQF Level 7)
  • Bachelor of Engineering Technology (Highways Engineering) ( NZQF Level 7)
  • A bachelor’s degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in the focus areas of construction management or highway engineering
  • A Graduate Diploma at NZQF Level 7, or a higher qualification which includes the knowledge requirements of a New Zealand Graduate Diploma in the focus areas of construction management, highway engineering or construction project managementA diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the knowledge requirements of a New Zealand Diploma in the focus areas of civil engineering, highway engineering or construction management
  • A Washington Accord or Sydney Accord accredited undergraduate (initial) engineering degree in Civil Engineering (listed see Note )
  • A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New ZealandNZ registration in the field of civil engineering as a Chartered Professional Engineer or an Engineering Technologist by the Institution of Professional Engineers New ZealandAND a minimum of five years’ relevant post-qualification work experience

NOTE：Where a Washington Accord accredited undergraduate engineering degree is a requirement, the engineering degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering degree awarded is Washington Accord accredited,please refer to the links from the International Engineering Alliance on their website:
http://www.ieagreements.org/Washington-Accord/Accredited.cfm.

Where a Sydney Accord accredited undergraduate engineering degree is a requirement, the engineering technology degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering technology degree awarded is Sydney Accord accredited, please refer to the links from the International
Engineering Alliance on their website:
http://www.ieagreements.org/Sydney/signatories.cfm.

Where a Seoul Accord accredited undergraduate IT degree is a requirement, the IT degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an IT degree awarded is Seoul Accord accredited, please refer to the following link:

The Seoul Accord | Seoul Accord