Plumber (General) 334111管道工（普通）职业介绍
- 管道工布局、测试和维护管道、固定装置、金属屋顶、配件、燃气表和调节器。
Plumbers layout, test and maintain pipes, fixtures, metal roofing, fittings, gas meters and regulators.
- 具体职责包括：
- 准备和/或研究计划和规范，以制定管道系统的布局和所需材料 preparing and/or studying plans and specifications to work out the layout of plumbing systems and materials needed
- 查找和标记连接位置 finding and marking positions for connections
- 在墙壁和地板上开孔以容纳管道 cutting holes through walls and floors to accommodate pipes
- 测量管道并标记切割或弯曲线 measuring pipes and marking cutting or bending lines
- 切割，穿线和弯曲管道，组装和安装管道，阀门和配件，连接管段和固定管道 cutting, threading and bending pipes, assembling and installing piping, valves and fittings, joining pipe sections and securing pipes
- 依照当地管道法规要求测试管线 testing lines as required by local plumbing regulations
- 安装锅炉、泵、加热和冷却系统、燃气器具、水箱、热水器、太阳能热水系统等设备，以及马桶、洗脸盆和工业处理单元等固定装置 installing equipment such as boilers, pumps, heating and cooling systems, gas appliances, water tanks, water heaters, solar water heating systems, and fixtures such as toilets, wash basins and industrial processing units
- 维护和修理管道系统 maintaining and repairing plumbing systems
- Plumber (General) 334111管道工（普通）的相关学历是CPC32413 Certificate III in Plumbing.
Plumber (General) 334111管道工（普通）技能及知识要求
Plumber (General) 334111管道工（普通）申请人需要证明自己具备以下方面的技能及知识：
- 通用单元 COMMON UNITS
- CPCPCM2039A 开展互动式职场交流 Carry out interactive workplace communication
- CPCPCM2040A 阅读计划并计算管道数量 Read plans and calculate plumbing quantities
- CPCPCM2041A 在管道和服务部门有效工作 Work effectively in the plumbing and services sector
- HLTAID002 提供基本的紧急生命支持（注意：申请人需要向 VETASSESS 提交急救证书，否则被认为不满足本单元。） Provide basic emergency life support (NOTE: A candidate will not be competent in this unit until a First Aid Certificate has been provided to VETASSESS.)
- CPCPCM2043A 执行 WHS 要求 Carry out WHS requirements
- CPCPCM2045A 处理和存储管道材料 Handle and store plumbing materials
- CPCPCM2046A 使用管道手动和电动工具 Use plumbing hand and power tools
- CPCPCM2047A 进行调平 Carry out levelling
- CPCPCM2048A 切割和连接钣金 Cut and join sheet metal
- CPCPCM2050A 标注材料 Mark out materials
- CPCPCM2052A 使用氧乙炔设备进行焊接 Weld using oxy-acetylene equipment
- CPCPCM2053A 采用手工金属弧焊设备进行焊接 Weld using manual metal arc welding equipment
- CPCPCM2049A 使用氧气-LPG-乙炔设备进行切割 Cut using oxy-LPG-acetylene equipment
- CPCPCM3022A 采用熔接法焊接聚乙烯和聚丙烯管 Weld polyethylene and polypropylene pipes using fusion method
- CPCPCM2054A 进行简单的混凝土浇筑和粉刷 Carry out simple concreting and rendering
- CPCPCM2055A 在屋顶上安全工作 Work safely on roofs
- CPCPCM3021A 闪光穿透屋顶和墙壁 Flash penetrations through roofs and walls
- CPCPCM3023A 制作安装有色金属压力管道 Fabricate and install non-ferrous pressure piping
- CPCPFS3031A 制作和安装消防栓和软管卷盘系统 Fabricate and install fire hydrant and hose reel systems
- 水 WATER
- CPCPWT3020A 将储罐连接并安装到生活供水系统 Connect and install storage tanks to a domestic water supply
- CPCPWT3021A 设置和安装水服务 Set out and install water services
- CPCPWT3022A 安装和调整供水控制和设备 Install and adjust water service controls and devices
- CPCPWT3023A 安装和调试热水系统 Install and commission water heating systems
- CPCPWT3024A 安装和维护家用水处理设备 Install and maintain domestic water treatment equipment
- CPCPWT3025A 安装水泵组 Install water pump sets
- CPCPWT3026A 安装和调试冷热水服务 Fit off and commission heated and cold water services
- CPCPWT3027A 从饮用水供应连接灌溉系统 Connect irrigation systems from drinking water supply
- CPCPWT3028A 安装供水服务 Install water service
- CPCPWT3029A 安装水管系统 Install water pipe systems
- 卫生 SANITARY
- CPCPSN3011B 规划住宅卫生管道系统布置图 Plan layout of residential sanitary plumbing system
- CPCPSN3022A 安装排放管道 Install discharge pipes
- CPCPSN3023A 制造和安装卫生烟囱 Fabricate and install sanitary stacks
- CPCPSN3024A 安装和装配卫生洁具 Install and fit off sanitary fixtures
- CPCPSN3025A 安装预处理设施 Install pre-treatment facilities
- 排水 DRAINAGE
- CPCPDR2021A 定位并清除堵塞 Locate and clear blockages
- CPCPDR2022A 安装家用处理厂 Install domestic treatment plants
- CPCPDR2024A 安装雨水和地下排水系统 Install stormwater and sub-soil drainage systems
- CPCPDR2025A 工地排水 Drain work site
- CPCPDR2026A 安装预制检查开口和外壳 Install prefabricated inspection openings and enclosures
- CPCPDR3021A 规划住宅卫生排水系统布置图 Plan layout of a residential sanitary drainage system
- CPCPDR3022A 安装地下卫生排水系统 Install below ground sanitary drainage systems
- CPCPDR3023A 安装现场处置系统 Install on-site disposal systems
- RIICCM210D 安装沟槽支架 Install trench support
- 以下两个可选知识技能组中至少要具备一个：
-
屋顶 ROOFING
- CPCPRF2022A 选择并安装屋顶板和墙面覆层 Select and install roof sheeting and wall cladding
- CPCPRF2023A 收集和储存屋顶水 Collect and store roof water
- CPCPRF2024A 为弯曲结构制造屋顶覆盖物 Fabricate roof coverings for curved structures
- CPCPRF3021A 接收屋面材料 Receive roofing materials
- CPCPRF3022A 制作和安装屋顶排水组件 Fabricate and install roof drainage components
- CPCPRF3023A 制作和安装外部防水板 Fabricate and install external flashings
- CPCPRF3024A 安装屋顶组件 Install roof components
- CPCPRF3025A 将屋顶覆盖物安装到弯曲的屋顶结构上 Install roof coverings to curved roof structures
- CPCPRF3026A 安装复合屋顶系统 Install composite roof systems
-
用气服务 GAS SERVICE
- CPCPGS3046A 在大篷车、移动房屋和移动工作场所安装液化石油气系统 Install LPG systems in caravans, mobile homes and mobile workplaces*
- CPCPGS3047A 在船舶上安装液化石油气系统 Install LPG systems in marine craft
- CPCPGS3048A 安装气压控制设备 Install gas pressure control equipment
- CPCPGS3049A 安装A型燃气器具烟道 Install Type A gas appliance flues
- CPCPGS3051A 净化消费管道 Purge consumer piping
- CPCPGS3053A 断开并重新连接 A 型燃气器具 Disconnect and reconnect Type A gas appliances
- CPCPGS3054A A型燃气器具的自然通风计算和安装 Calculate and install natural ventilation for Type A gas appliances
- CPCPGS3056A 安装燃气管道系统 Install gas piping systems
- CPCPGS3057A 量消费气体管道系统的尺寸 Size consumer gas piping systems
- CPCPGS3059A 安装液化石油气储存，总储存容量可达 500 升 Install LPG storage of aggregate storage capacity up to 500 litres
- CPCPGS3060A 安装总储存容量超过 500 升且小于 8 千升 的 LPG 储存 Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 KL
- CPCPGS3055A 安装气体分表 Install gas sub-meters
- CPCPGS3050A 安装B型燃气器具烟道 Install Type B gas appliance flues
- CPCPGS3052A 维护A型燃气器具 Maintain Type A gas appliances
- CPCPGS3061A A型燃气器具安装调试 Install and commission Type A gas appliances
飞出国注：对应以上的知识点，申请人可以通过https://training.gov.au/Search/Training 进一步查看每个知识点的具体说明，从而了解自己所需要掌握的技能和知识水平。
总结：电工职业属于TRA技工职业评估，实际的评估机构是VETASSESS Trade职业评估，管道工属于Licensed Trade职业，因此，电工职业评估需要书面材料审理，技术面以及实操考核三个步骤，具体可以参考 RTO评估机构VETASSESS Trade Occupation评估申请流程2020
