卑诗省工程师认证 GPEGBC - The Association of Professional Engineers and Geoscientists of British Columbia

加拿大签证与移民 加拿大职业资格认证
,
1

卑诗省工程师认证 GPEGBC - The Association of Professional Engineers and Geoscientists of British Columbia

成为会员 - 飞出国

工程专业和地球科学专业在加拿大属于两个管制行业，这就意味作为工程师和地球科学家必须具备以下条件之一：

  • 在工作所在的省/地区是注册专业工程师或注册专业地球科学家
    或者
  • 在工作所在的省/地区注册专业工程师或注册专业地球科学家的直接监督下工作

每个省和地区都有义务注册专业人士，让他们服务其管辖的地区。在英属哥伦比亚省，英属哥伦比亚专业工程师与地球科学家协会负责注册专业人士。加拿大工程师协会与加拿大专业地球科学家理事会把各省协会与各地区协会联系在一起，致力于制定并保持较高学术、经验与专业实践标准，保护公共健康、安全和福利。

作为APEGBE会员，你将代表着加拿大学术知识、工作经验和专业知识的最高标准。

作为专业工程师、专业地球科学家、非居民许可人士或者有限许可人士，你拥有专业证书和印章，你可以使用该印章对你个人认为维护社会安全和保护环境的文件进行签字和盖章。

所有会员都将被授予一个特殊的专业名称，可以加在自己名字后面，例如：专业工程师、专业地球科学家、受训工程师或受训地球科学家。这些名称已获得加拿大、美国以及世界其他许多国家的认可。

以下参考：How to Apply

Become a Member

Engineering and geoscience are regulated professions in Canada. This means that if you are working as an engineer or as a geoscientist in Canada, you must either:

  • Be registered as a Professional Engineer or Geoscientist in the province or territory in which you are working; or
  • Work under the direct supervision of someone who is registered as a Professional Engineer or Geoscientist in the province or territory in which you are working.

It is the responsibility of each province and territory to register the professionals offering services in their jurisdiction. In British Columbia, this is done by the Association of Professional Engineers and Geoscientists of British Columbia. Provincial and territorial associations are linked through Engineers Canada and the Canadian Council of Professional Geoscientists. The association strives to set and maintain high academic, experience and professional practice standards. These standards work to protect public health, safety and welfare.

As a member of APEGBC, you will represent the highest standards of academic knowledge, work experience, and professionalism in Canada.

As a Professional Engineer, Professional Geoscientist, Non-Resident Licensee or Limited Licensee, you gain a professional certificate and stamp. The stamp allows you to sign and seal documentation that you believe upholds the paramount safety of society and the well-being of the environment.

All members are also given a special professional designation to use after their name, for example: P.Eng., P.Geo., EIT or GIT. These designations are recognized in Canada, the United States and many other international countries.

以下参考：How to Apply

受训会员 - 飞出国

以下参考：EIT First Time Applying in Canada

以下主要介绍首次申请EIT的要求。EIT(Engineers-in-Training) First Time Applying in Canada

关于此类会员 FLYabroad

此类会员主要针对刚刚完成大学水平工程项目（或其他同等学历）的毕业生，满足注册既定学科实践的学术要求。

申请对象 FLYabroad

受训工程师是APEGBC会员，已有规定的学术资格，但是仍然在努力获得4年的工程经验，以期达到专业注册的工作经验要求。申请之前，你可以使用自我评估工具对自己的资格进行非正式自我评估。

申请要求 FLYabroad

申请成为APEGBC受训工程师，你必须达到最低学术要求，随着工作经验的不断积累，你还必须遵守协会良好品行的要求。

学术要求 FLYabroad

申请注册成为受训工程师，你必须在应用科学、工程学、地球科学、科学或科技专业拥有4年全日制学士学位或同等学历。如果没有任何相关专业认可的学士学位，必须参加学术考试 和/或面试。

如果根据工程学科必修课课程大纲对你的非工程学位进行详细的评估后，你必须参加考试，那么，只有你顺利通过相关考试或者完成相关课程，清除所有的评估缺陷之后，你在完成学业之前获得的一些工作经验才可能满足4年合格工作经验的要求。此外，如果你在达到学术要求之前有相关工作经验，那么，只有该工作经验满一年，符合APEGBC的Competency Framework or Satisfactory Experience Guidelines，且是在合格专业人士的监督下完成的，你才可以获得相关学分。这些都要视情况而定。

更对关于受训工程师的学术要求 FLYabroad

你必须证明自己满足最低学术要求，才可以成为受训工程师。你必须在应用科学、工程学、地球科学、科学或科技专业拥有四年全日制的学士学位。

通常意味着你必须有认可大学工程专业的学士学位。

如果没有相关的学士学位，你的学术背景必须接受评估，而且很可能你还必须参加相关学术考试。

只有满足下列条件时，你才有可能获得豁免：

  • 学士学位获得工程认证机构的认可，该认证机构与APEGBC签订了相互认可协议
  • 在同一学科同时拥有工程专业学士学位和认可的工程专业硕士学位
  • 拥有工程专业学士学历，且有不少于7年的工程经验，或者1999年之前毕业于ECSA认证项目 （南非）。是否获得豁免还要基于在APEGBC办公室一个小时的面试。
  • 拥有应用科学、工程学、地球科学、科学或科技专业的学士学位（或其他同等学历），且通过了US Fundamentals of Engineering and the Principles and Practice of Engineering考试
  • 拥有APEGBC名单上非认可的国际著名项目的工程专业学士学位或研究生学位。

良好品行要求 FLYabroad

你必须具备良好品行和声誉，才可以成为APEGBC会员。良好品行，指道德与伦理力量，包含正直、坦率、诚实与诚信。所有APEGBC会员都必须遵守 道德规范，管理好个人专业实践行为。APEGBC会对你提供的信息进行审查，以确保你符合所有相关标准。

申请方式 FLYabroad

APEGBC会员在线申请

现在在线申请 >>

必要文件 FLYabroad

  • 公民身份认证证明（包括出生证明、护照或永居证)
  • 官方成绩单（由教育机构直接递送到APEGBC办公处）
  • 完整的 自我评估清单 (适用于非认证学位)
  • 对在英属哥伦比亚之外获得的学位的课程的描述(适用于非认证学历)
  • 硕士或博士论文摘要
  • 会员确认 （来自加拿大以外国家的其他专业工程管理与注册机构）

注意：关于公证的复印件，首先必须复印个人所有文件，然后请求专业工程师、专业地球科学家或公证处在上面签上原件真实副本字样并盖章。你也可以携带原件和复件到APEGBC办公处，复件获得确认后，将其作为认证复件递交。请不要向APEGBC邮递个人公民卡、出生证明或当前护照原件。

申请费用 FLYabroad

  • 第一次申请 (如果你在大学工程专业或地球科学专业毕业12个月内递交的申请，那么，你不必支付任何申请费用) - $0.00
  • 申请费用 - 其他省或地区学术合格的实习工程师、实习地球科学家或实习人士 - $0.00
  • 申请费用 - 第一次申请 - 申请时支付 - $472.50
  • 年费 - 注册之后按比例支付 - $232.05

申请之后 FLYabroad

申请审查将会在所有必要文件递交成功之后开始，一般需要进行1周到4个月。有关申请进度，详见 申请进度.

首先是学术审查，其目的是确定你是否满足APEGBC对受训工程师的最低学术要求。紧接着是安排学术考试。只有你拥有合格的学术资格或者顺利通过安排的学术考试时，才可以成为注册受训工程师。

注册成功之后，你将收到一封电子邮件和一个欢迎包，里面包含个人注册证。

最后，受训工程师必须使用 技能工作报告系统 报告自己的工程工作经验。有关专业工程师经验要求，见: 经验资格 。

如果工作经验与所学专业不符，你将必须经历学术审查，还可能必须参加面试和/或考试。

以下内容来源：Professional Registration

Members-in-Training

以下参考：EIT First Time Applying in Canada

以下主要介绍第一次申请EIT的要求。EIT(Engineers-in-Training) First Time Applying in Canada

About this Category

This category is for recent graduates from university level engineering programs (or the equivalent) who have met the academic requirements for registration in their intended discipline of practice.

Who Can Apply

An EIT (Engineer-in-Training) is a member of APEGBC who has demonstrated academic qualification, but is still working toward gaining the required 4 years of engineering experience for professional registration. To do an informal self-assessment of your qualification before applying, please go to the Self-Assessment Tool.

Application Requirements

To apply for Engineer-in-Training status with APEGBC you must meet the minimum academic requirements. As you continue to gain experience, you are expected to also adhere to the association’s good character requirements.

Academic Requirements

To apply for registration as an Engineer-in-Training, you are required to have the equivalent of graduation from a four year full time bachelors program in applied science, engineering, geoscience, science or technology. If you do not have an undergraduate degree in engineering from an accredited university program, you may be assigned academic examinations and/or an interview.

If you have been assigned examinations after a detailed assessment of your non-engineering degree against the syllabus of required topics in your discipline of engineering, please note that some of your experience prior to completing the assigned topics may not be credited towards the required four years of satisfactory experience until all assessed deficiencies have been cleared either by successfully completing the examinations, or by passing approved equivalent courses. Credit is typically given for up to one year of experience gained prior to completion of academic requirements if it meets APEGBC’s Competency Framework or Satisfactory Experience Guidelines and is supervised by an appropriate professional. This is examined on a case-by-case basis._

Learn more about Academic Requirements for Engineer-in-Training status

To obtain your EIT status you must demonstrate that you have met the minimum academic requirements. You are required to have the equivalent of graduation from a four year full time bachelors program in applied science, engineering, geoscience, science or technology.

This normally means that you have a bachelor’s degree in engineering from an accredited university program.

If you do not have an undergraduate degree in engineering from an accredited university program, your academic background will be assessed and you may be assigned academic examinations.

You may be granted exemption from examinations if:

  • You have an undergraduate engineering degree recognized by an engineering accreditation body that has a Mutual Recognition Agreement with APEGBC:

-     [Washington Accord](http://www.ieagreements.org/Washington-Accord/signatories.cfm) (Must be in the list of signatories)
-     [Commission des Titres d’Ingénieur (CTI)](http://www.cti-commission.fr/) France

  • You have an undergraduate engineering degree and an approved postgraduate engineering degree in the same discipline as that of your undergraduate engineering degree.

  • You have an undergraduate engineering degree and at least seven years of engineering experience or you have graduated from an ECSA-accredited program (South Africa) prior to 1999.   The decision to grant a reduction or an exemption is based on the results of a one-hour interview held at the APEGBC office.

  • You have an undergraduate degree or equivalent in applied science, engineering, geoscience, science or technology; and have written and passed the US Fundamentals of Engineering and the Principles and Practice of Engineering exams in the discipline of registration for which you are applying.

  • You have an undergraduate or post graduate engineering degree from a program on APEGBC’s list of  Non-Accredited Reputable International Programs.

Good Character Requirement

In order to become a member of APEGBC you must be of good character and reputation. Good character connotes moral and ethical strength and includes integrity, candor, honesty and trustworthiness. All APEGBC members are held accountable to a Code of Ethics that governs the way an individual practices his or her profession. APEGBC will review the information provided in your application to ensure that you meet these standards.

How to A​pply

Applications are made through the APEGBC Online Membership Application.

Apply Online Now >>

Documents Required

  • *Certified Proof of Citizenship (Birth Certificate, Passport, or Permanent Resident Card)
  • Official transcripts sent directly to the APEGBC office from your educational institutions
  • Completed Self-Evaluation Checklist for discipline of application (for non-accredited degrees)
  • Course descriptions for degrees achieved outside of British Columbia (for non-accredited degrees)
  • Thesis abstracts for Masters or Ph.D if applicable
  • Confirmation of membership from other professional engineering regulatory and certification organizations outside of Canada if applicable

*To have a copy certified, make a photocopy of your document (citizenship card, birth certificate or current passport) and ask a P.Eng., P.Geo., P.E., or Notary Public to sign and stamp it as a “true copy of the original”. Alternatively, you may bring your original document as well as a photocopy of it to the APEGBC office. We will confirm that it is a true copy of the original and accept it as a certified copy. Please do not mail your original citizenship card, birth certificate or current passport to APEGBC.

How Much Does it Cost?

  • First-time applicant (application fee is waived if applying within 12 months of graduation from an engineering or geoscience post-secondary program) - $0.00
  • Application Fee - Academically-qualified EIT, GIT, MIT, ing jr, géo jr or stagiare in other province or territory - $0.00
  • Application Fee - First time applicant - With application - $472.50
  • Annual Fee EI- Prorated, paid after enrolment - $232.05

After Applying

It takes approximately 1 week to 4 months to review your application once all required documents have been received. For information about checking the status of your application please see Application Status.

An academic review will be conducted to determine if you meet APEGBC’s minimum academic requirements for EIT status. Following this review, academic examinations may be assigned. Please note that you will not be enrolled as an EIT unless you are deemed academically qualified or have successfully completed the academic exams assigned.

Once enrolled, you will be sent a notification email and a welcome package that will include your certificate of enrollment.

Engineers-in-Training are expected to eventually report engineering work experience using the Competency Experience Reporting System. For more information on the experience requirements for P.Eng. registration, please visit the Experience Qualifications section.

Please note that if you gain experience in a different discipline from your academic qualifications, you will need to undergo an academic review and possible interview and/or examinations.

以下内容来源：Professional Registration

专业会员与许可 飞出国

在加拿大第一次申请注册工程师 FLYabroad

此类许可申请者必须满足下列条件：受训工程师，或者在加拿大第一次申请注册工程师。如果你既不是加拿大公民也不是加拿大永久居民，那么，你必须申请非居民许可

申请要求 FLYabroad

申请成为APEGBC专业工程师，你必须同时满足学术、经验、法律与道德、语言以及良好品行要求。

在申请之前，你可以使用 自我评估工具 对自己的资格进行非正式自我评估。

学术要求 FLYabroad

申请注册成为专业工程师，必须在相关的应用科学、工程学、地球科学、科学或技术方面有4年全日制的学士学位。否则你必须参加学术考试 和/或面试。

**更多关于专业工程师的学术要求 FLYabroad

你必须证明自己满足最低学术要求，才可以成为专业工程师。你必须在相关的应用科学、工程学、地球科学、科学或技术方面有4年全日制的学士学位。这就意味着你必须拥有来自认证大学项目的工程专业学士学位。

否则你的学术背景必须接受评估，而且很可能你还必须参加相关学术考试。

如果根据你的非工程专业学历的评估结果，你必须参加考试，那么，只有你顺利通过相关考试或者完成相关课程，清除所有的评估缺陷之后，你在完成学业之前获得的一些工作经验才可能满足4年合格工作经验的要求。此外，如果你在达到学术要求之前有过工作经验，那么，只有该工作经验满一年，符合APEGBC的Competency Framework or Satisfactory Experience Guidelines，且是在合格专业人士的监督下完成的，你才可以获得相关学分。

只有满足下列条件时，你才有可能获得考试豁免：

  • 学士学位获得工程认证机构的认可，该认证机构与APEGBC签订了相互认可协议

  • 在同一学科同时拥有工程专业学士学位和认可的工程专业硕士学位

  • 拥有工程专业学士学历，且有不少于7年的工程经验，或者1999年之前毕业于ECSA认证项目 （南非）。是否获得豁免还要基于在APEGBC办公室一个小时的面试。

  • 拥有应用科学、工程学、地球科学、科学或科技专业的学士学位（或其他同等学历），且通过了US Fundamentals of Engineering and the Principles and Practice of Engineering考试

  • 拥有APEGBC名单上非认可的国际著名项目的工程专业学士学位或研究生学位。 非认证著名国际项目。

Professional Membership and Licence

Engineer First Time Applying in Canada

About this Category This category is for Engineers-in-Training (EIT) or other individuals who are applying for Professional Engineer status for the first time in Canada. If you are not a citizen or permanent resident of Canada, you will be applying for a Non-Resident Licence (NRL P.Eng.).

Application Requirements

To apply for Professional Engineer status with APEGBC you must meet academic, experience, law and ethics, language and good character requirements.
To do an informal self-assessment of your qualifications before applying, please go to the Self-Assessment Tool

Academic Requirements

To apply for registration as a professional engineer, you are required to have the equivalent of graduation from a four year full time bachelors program in applied science, engineering, geoscience, science or technology. If you do not have an undergraduate degree in engineering from an accredited university program, you may be assigned academic examinations and/or an interview.

Learn more about Academic Requirements for Professional Engineer status >

To obtain your Professional Engineer status you must demonstrate that you have met the minimum academic requirements. You are required to have the equivalent of graduation from a four year full time bachelors program in applied science, engineering, geoscience, science or technology. This normally means that you have a bachelor’s degree in engineering from an accredited university program.

If you do not have an undergraduate degree in engineering from an accredited university program, your academic background will be assessed and you may be assigned academic examinations.

If you have been assigned examinations after a detailed assessment of your non-engineering degree against the syllabus of required topics in your discipline of engineering, please note that some of your experience prior to completing the assigned topics may not be credited towards the required four years of satisfactory experience until all assessed deficiencies have been cleared either by successfully completing the examinations, or by passing approved equivalent courses. Credit is typically given for up to one year of experience gained prior to completion of academic requirements if it meets APEGBC’s Competency Framework or Satisfactory Experience Guidelines and is supervised by an appropriate professional. This is examined on a case-by-case basis._

You may be granted exemption from examinations if:

  • You have an undergraduate engineering degree recognized by an engineering accreditation body that has a Mutual Recognition Agreement with APEGBC:
  • You have an undergraduate engineering degree and an approved postgraduate engineering degree in the same discipline as that of your undergraduate engineering degree.
  • You have an undergraduate engineering degree and at least seven years of engineering experience or you have graduated from an ECSA-accredited program (South Africa) prior to 1999. The decision to grant a reduction or an exemption is based on the results of a one-hour interview held at the APEGBC office.
  • You have an undergraduate degree or equivalent in applied science, engineering, geoscience, science or technology; and have written and passed the U.S. Fundamentals of Engineering and the Principles and Practice of Engineering exams in the discipline of registration for which you are applying.
  • You have an undergraduate or post graduate engineering degree from a program on APEGBC’s list of Non-Accredited Reputable International Programs.

经验要求 飞出国

想要注册成为专业工程师或获得非居民许可证来进行专业工程实践，你必须证明自己拥有不少于4年的 合格工程工作经验，且其中至少1年的工作经验来自加拿大环境部，才可以成为注册专业工程师或获得非居民许可证。如果工作经验和所学专业不符，那么，你将必须经历学术审查，还可能参加面试和/或考试。

**注意： **

如果你拥有来自美国的专业工程师许可证，且持有当前NCEES记录，那么，你可以递交这些证件，代替工作经验、推荐信、成绩单和美国州理事会证明。

**更多关于专业工程师经验要求 FLYabroad

合格工程工作经验必须包括理论的应用，应该参与或经历下列广泛领域：实践经验、管理、沟通和工程学对社会的意义。更多信息参见： 合格工程经验指南。

毕业之前获得的工作经验 FLYabroad

毕业之前获得的工作经验必须符合下列条件，才是合格的工作经验：不超过1年；在合格专业人士的监督下完成或满足APEGBC所有经验标准。

毕业之后获得的工作经验 FLYabroad

如果你拥有研究生学历，且在读研期间获得了相关工程经验，那么，你可以凭借该工程经验获得一定学分。

具体学科要求 FLYabroad

如果你注册的专业是计算机工程、环境工程、森林工程、综合工程、船舶工程、海洋建筑工程、软件工程或结构工程，那么，你还必须满足一些额外要求。

实践经验领域指南 FLYabroad

下列指南适用于在下列实践领域拥有工作经验的申请者，旨在提供与经验活动相关的信息。

工程建设与管理指南

大学教授经验指南

矿业经验指南

销售工程经验指南

报告个人经验 FLYabroad

APEGBC目前正在向现代化在线系统过渡，帮助申请者报告工作经验。其 技能经验报告系统 将取代递交工作经验信息的传统方式。

你只有符合下列条件时，才可以使用该系统递交工作经验信息：

  1. 申请专业工程师注册或许可，且在2015年6月1日当天或之后收到的申请
  2. 在2015年6月1日之前申请注册专业工程师，且截止到2015年6月1日，毕业之后只获得不超过2年的工作经验

例外

  1. 申请专业工程师许可，但是截止到2015年6月1日，只获得不超过2年的工作经验（可以通过技能系统或传统报告方式报告工作经验）
  2. 目前是加拿大其他管辖区的注册或许可专业工程师
  3. 美国专业工程师，持有当前州理事会许可证，且可以向APEGBC提供当前NCEES记录
  4. 目前是澳洲工程师协会、香港工程师机构或爱尔兰工程师协会注册专业（或特许）工程师

传统报告方式（不适用于2015年6月1日之后的专业工程师申请者）FLYabroad

传统报告方式是对个人工程工作经验的详细描述，应该使用第一人称和PDF格式，且清晰易读。记录个人经验时应该使用时间顺序，并提供下列信息：

  • 工作日期、雇主姓名、个人职位以及专业监督者的姓名与职位
  • 使用第一人称对自己负责的工作进行描述，其中包括对参与的项目以及在每个项目中担任的角色的描述
  • 明确自己遇到过的工程难题以及自己的解决方案
  • 工作过程中使用的方法和资源以及遵循的标准和规范
  • 自己负责的监督工作
  • 其他可以明确工程经验性质和水平以及个人能力的细节

如果期间有任何时间间隙或重叠，你都必须解释清楚。APEGBC会一直寻找可以代表你的整个职业生涯的有关经验与责任的证明。

一个典型的经验报告内容将会在10页到20页单页之间。发表论文和/或参加培训不能包含在工作经验详细报告中，必须列在最后。

你可以借鉴工程工作经验模板。使用该模板时，你必须保证自己提供的多个项目来自一个工作时间段，提供的这些项目可以证明自己具备一定深度和广度的知识，符合合格工程经验指南的相关要求。

如果你是美国注册专业工程师，且持有当前NCEES记录，那么，你可以递交当前NCEES记录，代替工作经历、推荐信、成绩单以及美国州理事会证明。

Experience Requirements

To become registered as a Professional Engineer or to obtain a Non-Resident Licence to practice professional engineering, you must demonstrate that you have a minimum of four years of satisfactory engineering work experience. At least one of these years must be gained in a Canadian Environment. Please note that if you gain experience in a different discipline from your academic qualifications, you will need to undergo an academic review and possible interview and/or examinations.

Note:

Applicants who are licensed in the United States as professional engineers and hold a current NCEES Record may submit this in lieu of work details, references, transcripts and US State Board confirmations.

Learn more about the experience requirements for Professional Engineer status >

Acceptable engineering work experience must include the application of theory and should provide exposure to, or experience in, the following broad areas: practical experience, management, communication, and the social implications of engineering. For more information, please refer to the Satisfactory Engineering Experience Guidelines.

Pre-Graduation Experience

Up to a maximum of one year of pre-graduation or co-op experience may be accepted if it is supervised by the appropriate professional and if it otherwise satisfies all of APEGBC’s experience criteria.

Experience Gained during Postgraduate Education

Applicants with post-graduate degrees may be given credit for engineering experience gained as part of their post-graduate studies.

Specific Discipline Requirements

If you are applying for registration in Computer Engineering, Environmental Engineering. Forest Engineering, Integrated Engineering, Marine Engineering, Naval Architectural Engineering, Software Engineering or Structural Engineering there are additional requirements.

Area of Practice Experience Guidelines

The following guidelines should be used by those gaining experience in the following areas of practice. The intent is to provide information on the types of activities that should be reported as experience.

Guideline for Project and Construction Management

Guideline for Experience gained as a University Professor

Guideline for Experience gained in the Mining Industry

Guideline for Sales Engineering Experience

Reporting Your Experience

APEGBC is currently transitioning to an updated online system for applicants to report their work experience details. This Competency Experience Reporting System will replace the traditional template for submitting work experience information to APEGBC.

Submitting work experience details through the Competency Experience Reporting System is required for:

  1. All new applicants for Professional Engineer registration or licence whose application was received on or after June 1st, 2015.
  1. Individuals who have applied for Professional Engineer registration or licence prior to June 1, 2015 but, as of June 1, 2015, had two or fewer years of experience following graduation

Exceptions:

Separate processes for experience reporting are in place for certain applicant groups. You will not be required to use the Competency Experience Reporting System if you are:

  1. An applicant for P.Eng. licensure who, prior to June 1, 2015, had submitted a P.Eng. application and had two or more years of work experience. These applicants have the option of reporting work experience through the competency system or the traditional reporting method (please see below).
  1. Currently registered or licensed as a professional engineer with another jurisdiction in Canada;
  2. A U.S. Professional Engineer who holds a current state board license and can provide a current NCEES Record to APEGBC; or
  3. Currently registered as a professional or chartered engineer with Engineers Australia (CPEng), the Hong Kong Institution of Engineers (MHKIE), or Engineers Ireland (CEng MIEI).

Traditional Reporting Method (Not applicable to P.Eng. applicants after June 1, 2015)

This is a detailed description of your engineering work experience. It should be in first-person, in electronic format (PDF) and organized for clarity of reading. Your experience must be presented in chronological order and provide the following information for each position/employer:

  • dates of engagement, name of the employer, your position and the name and position of your professional supervisor;
  • a first-person description of the work for which you were responsible, including a description of the projects in which you were involved and your role in each project;
  • clearly identify the engineering problems you encountered and how you solved them;
  • methods, resources, standards and codes upon which you relied to carry out the work;
  • supervision you provided (if any);
  • other details as applicable that clearly demonstrate to APEGBC’s reviewers the nature and level of your engineering or experience and your competence.

Any gaps or overlaps in time periods should be explained. APEGBC will be looking for evidence of a progression of experience and responsibility throughout your career.

As a guideline, a typical experience report will not be less than ten pages and no more than twenty pages, single-spaced. Note that publications and/or training do not count as part of the Work Experience Details Report and should be listed at the end.

An Engineering Work Experience Template is available for use. When using the template, please ensure that you provide multiple projects from each period of employment that when combined, will demonstrate that you have the the adequate depth and breadth of knowledge required as per the Satisfactory Engineering Experience Guidelines.

Applicants who are licensed in the United States as professional engineers and hold a current NCEES Record may submit this in lieu of work details, references, transcripts and US State Board confirmations.

法律与道德要求 FLYabroad

英语语言实践能力 FLYabroad

通过如下材料评估英语语言实践能力：

  • 专业实践考试中的写作
  • 推荐人/验证器的评论
  • 面试官的评论（如果有面试）

注意：

历时1个小时的专业时间考试写作（参见上文法律和道德要求），内容是在所给的3个话题中任选一个话题进行写作，评分标准包括对话题的理解以及在书写表达能力。

良好品行要求 FLYabroad

你必须具备良好品行和声誉，才可以成为APEGBC会员。良好品行，指道德与伦理力量，包含正直、坦率、诚实与诚信。所有APEGBC会员都必须遵守 道德规范，管理好个人专业实践行为。APEGBC会对你提供的信息进行审查，以确保你符合所有相关标准。

申请方式 飞出国

APEGBC会员在线申请

现在在线申请 >>

使用Competency Online Experience Reporting System时必要的文件 FLYabroad

  1. 公民身份认证证明（包括出生证明、护照或永居卡）（已经递交这些文件的实习工程师不用再次递交）
  2. 官方成绩单（由教育机构直接递送到APEGBC办公处）（已经递交这些文件的受训工程师不用再次递交）
  3. 完整的工作经验报告 （技能经验报告系统）
  4. 硕士或博士论文摘要 （技能经验在线报告系统)
  5. 会员证明 （来自加拿大以外国家的其他专业工程管理与注册机构）

使用Traditional Experience Reporting Format时必要的文件 (不适用于2015年6月1日之后的专业工程师申请者) FLYabroad

  1. 公民身份认证证明（包括出生证明、护照或永居卡，已经由专业工程师、专业地球科学家或公证处盖章/签字）（已经递交这些文件的受训工程师不用再次递交）
  2. 官方成绩单（由教育机构直接递送到APEGBC办公处）（已经递交这些文件的受训程师不用再次递交）
  3. 完整的纸质工作经验报告（包括学科具体要求）
  4. 推荐表格 （由专业工程师监督者/同时直接递送给APEGBC办公处）(不少于4个）
  5. 硕士或博士论文摘要
  6. 会员证明（来自加拿大以外国家的其他专业工程管理与注册机构）

注意：

美国许可专业工程师不用递交上述3、4、5和6相关文件，但是必须递交一份NCEES记录

获得认证复印件，首先必须复印个人所有文件，然后请求专业工程师、专业地球科学家或公证处在上面签上原件真实副本字样并盖章。你也可以携带原件和复件到APEGBC办公处，复件获得确认后，将其作为认证复件递交。如果你不能亲自到APEGBC办公处，你可以委托第三方携带原件和复件到APEGBC办公处，向我们提供相关授权信，然后进行相关事宜。请不要向APEGBC邮递个人公民卡、出生证明或当前护照原件。

申请费用 飞出国

申请费 - 专业注册 (加拿大公民和加拿大永久居民)- 递交申请时支付 - $472.50
申请费 - 非居民许可证 - 递交申请时支付 - $472.50
目前是APEGBC实习工程师（实习工程师申请费全免）- 递交申请时支付 - $315.00
目前是APEGBC实习工程师 (申请注册实习工程师时，支付了申请费用) - 递交申请时支付 - $0.00
专业实践考试 - 在加拿大报考 - 递交考试申请时支付 - $241.50
专业实践考试 - 在美国报考 - 递交考试申请时支付 - $299.25
专业实践考试 - 不在加拿大和美国报考- 递交考试申请时支付- $341.25
专业实践考试学习指南 (选择性) - 个人购买 - 订购时支付 - $207.99
专业实践考试学习指南 (选择性) - 从APEGBC邮购 - 订购时支付 - $238.99
法律与道德研讨会 - 早期注册 - 注册/订购时支付 - $362.25
法律与道德研讨会 - 光盘套装 - 注册/订购时支付 - $386.40
许可费 - 成功注册/获得许可之后支付-$262.50
年费 - 专业注册人士：专业工程师或专业地球科学家（加拿大公明或加拿大永久居民）- 注册之后，按比例支付 - $399.00
年费 - 非居民注册人士：专业工程师或专业地球科学家 - 获得许可支护，按比例支付 -$622.25

申请之后 飞出国

申请审查将会在所有必要文件递交成功之后开始，一般需要进行2到4个月。有关申请进度，详见 申请进度.

首先是学术审查，其目的是确定你是否满足APEGBC对注册专业工程师的最低学术要求。如果你不能满足这些学术要求，你可能必须参加学术考试。接下来是经验审查，其目的是确定你是否满足最低工作经验要求。经验审查过程中，你必须参加安排的面试。

如果你不是在加拿大获得的工程学历，但是拥有不少于7年的工作经验，那么，你必须参加安排的面试，才能确定自己是否可以凭借工作经验不参加所有/一些常规学术考试。注意：参加面试不意味一定可以获得学术考试豁免资格。

所有专业人士申请者都必须报考并通过 专业实践考试，参加 法律与道德研讨会 （或者 购买并观看法律与道德研讨会光盘) ，并满足英语语言能力和良好品行要求。

注册成功或获得许可之后，你将收到一封电子邮件，里面包含欢迎包、印章和个人注册/许可证。

以下来源： https://www.apeg.bc.ca/Become-a-Member/Academic-Examinations-and-Syllabi

学术考试与考试大纲 飞出国

APEGBC安排此类学术考试旨在：

  • 证明你了解自己学习的学科
  • 补充你的学术资格

对你的学术资格进行详细评估之后，APEGBC会为你安排具体的考试。在他们还没有正式安排之前，请不要报名参加任何考试。

Law and Ethics Requirement

Apply to write the Professional Practice Examination >
Attend the Law and Ethics Seminar or purchase and view the CD Set >

English Language Competence for Practice

English Language Competence for Practice is evaluated through:

  • An essay written with the Professional Practice Examination (see note)
  • Comments of referees/validators; and
  • Observations of interviewers (if an interview is required).

Note:

The one hour Professional Practice Examination essay (see the Law and Ethics Requirement above) involves being required to select one out of three topics to develop into a written answer. You will be graded on your level of comprehension of what the topic is asking as well as your ability to communicate your response in writing.

Good Character Requirement

In order to become a member of APEGBC you must be of good character and reputation. Good character connotes moral and ethical strength and includes integrity, candor, honesty and trustworthiness. All APEGBC members are held accountable to a Code of Ethics that governs the way an individual practices his or her profession. APEGBC will review the information provided in your application to ensure that you meet these standards.

How to A​pply

Applications are made through the APEGBC Online Membership Application.

Apply Online Now >>

Documents Required Using the Competency Online Experience Reporting System

  1. *Certified Proof of Citizenship (Birth Certificate, Passport, or Permanent Resident Card) (EITs are exempt if already submitted)
  1. Official transcripts sent directly to the APEGBC office from your educational institutions (EITs are exempt if already submitted)
  2. Completed experience report using the Competency Experience Reporting System
  3. Thesis abstracts for Masters or Ph.D if applicable (submitted through the Competency Online Experience Reporting System)
  4. Confirmation of membership from other professional engineering regulatory and certification organizations outside of Canada if applicable

Documents Required Using the Traditional Experience Reporting Format (Not applicable to P.Eng. applicants after June 1, 2015)

  1. *Certified Proof of Citizenship (Birth Certificate, Passport, or Permanent Resident Card that has been stamped/signed by either a P.Eng., P.Geo or Notary Public) (EITs are exempt if already submitted)
  1. Official transcripts sent directly to the APEGBC office from your educational institutions (EITs are exempt if already submitted)
  2. Completed paper-based experience report including discipline-specific requirements if applicable
  3. Reference Forms sent directly to APEGBC by P.Eng. supervisors/colleagues (Minimum of four required)
  4. Thesis abstracts for Masters or Ph.D if applicable
  5. Confirmation of membership from other professional engineering regulatory and certification organizations outside of Canada if applicable

Note:

In lieu of 3, 4, 5, and 6, US-Licensed Professional Engineers may submit an NCEES Record

*To have a copy certified, make a photocopy of your document (citizenship card, birth certificate or current passport) and ask a P.Eng., P.Geo., P.E., or Notary Public to sign and stamp it as a “true copy of the original”. Alternatively, you may bring your original document as well as a photocopy of it to the APEGBC office. We will confirm that it is a true copy of the original and accept it as a certified copy. If you cannot come in person, you can send a third party to bring in your original document and the photocopy to be certified as long as a signed letter is provided authorizing the individual to provide the documentation on your behalf. Please do not mail your original citizenship card, birth certificate or current passport to APEGBC.

How Much Does it Cost?

What-When-Amount

Application Fee - Professional Registration (Canadian Citizens and Permanent Residents of Canada)- With application - $472.50
Application Fee - Non-Resident Licence - With application - $472.50
Applicant who is currently an EIT with APEGBC (EIT application fee was waived)- With application - $315.00
Applicant who is currently an EIT with APEGBC (paid an application fee for EIT application) - With application - $0.00
Professional Practice Examination - written in Canada - With examination application - $241.50
Professional Practice Examination - written in the United States - With examination application - $299.25
Professional Practice Examination - written outside of Canada or the United States-With examination application- $341.25
Professional Practice Examination Study Kit (optional) - picked up in person - When ordered - $207.99
Professional Practice Examination Study Kit (optional) - mailed from APEGBC - When ordered - $238.99
Law and Ethics Seminar - early registration - When registered/ordered - $362.25
Law and Ethics Seminar - CD Set - When registered/ordered - $386.40
Licensing Fee-After registration/licensure-$262.50
Annual Fee - Professional Registrants P.Eng. or P.Geo. (Canadian Citizens or Permanent Residents of Canada)- Prorated, paid after registration-$399.00
Annual Fee - Non Resident Licensees P.Eng. or P.Geo. - Prorated, paid after licensure-$622.25

After Applying

It takes approximately 2-4 months to review your application once we have received all of the required documents. For information about checking the status of your application please see Application Status.

First, an academic review will be done to determine if you meet APEGBC’s minimum academic requirements for professional engineer status. If these requirements are not met, academic examinations may be assigned. Next, your experience will be reviewed to determine whether it meets minimum requirements. An interview may be required as part of the experience review process.

If you earned your engineering degree outside of Canada and have more than seven years of engineering experience, you may be granted an interview in order to determine if all or some of the academic exams normally assigned to someone with your degree background can be waived on the basis of your experience. There is no guarantee that an interview will result in the waiving of academic examinations.

All applicants for professional membership are required to sit and pass a Professional Practice Examination and attend a Law and Ethics Seminar (or purchase and view the Law and Ethics Seminar CDs) and to fulfill the English Language Competency and Good Character requirements.

Once registered or licensed, you will be sent a notification e-mail along with a welcome package, stamp and your certificate of registration/licensure.

以下来源： https://www.apeg.bc.ca/Become-a-Member/Academic-Examinations-and-Syllabi

Academic Examinations and Syllabi

About this Category Academic examinations may be assigned by APEGBC to:

  • Demonstrate your knowledge of your discipline
  • To supplement your academic qualifications

Specific examinations are assigned to you by APEGBC after a detailed assessment of your academics. Do not sign up for examinations before they are officially assigned.

考试日期和报名截止日期分别是什么时间? FLYabroad

收到申请

考试时间

报名截止日期
1月 5月 2月
7月 12月 8月

学习哪些课程? FLYabroad

你必须准备考试规定的内容，详见：工程学 or Geoscience 。所有考试题目都来自考试规定的内容。

你可以使用任何备考书，但是，你很可能希望可以参考具体考试大纲，选择备考资料。注意：只有报考地球科学考试的应试者才会收到相关推荐学习资料的通知，因为这些书在APEGBC也买不到。

尽管已经安排好的学术考试不可能由完成某个课程来取代，但是，如果你是因为自己学术背景没有包含必要课题而必须参加安排的学术考试，那么你也可以通过参加大学应用科学或科学课程并获得相应学分也完成该考试（**注意：**一个学期的课程不必涵盖所有课题。）如果你希望通过递交相关课程来涵盖某个课题，那么，你必须在完整的自我评估表格中提供详细的课程大纲。

如果根据你的非工程专业学历的评估结果，你必须参加考试，那么，只有你顺利通过相关考试或者完成相关课程，清除所有的评估缺陷之后，你在完成学业之前获得的一些工作经验才可能满足4年合格工作经验的要求。此外，如果你在达到学术要求之前有过工作经验，那么，只有该工作经验满一年，符合APEGBC的Competency Framework or Satisfactory Experience Guidelines，且是在合格专业人士的监督下完成的，你才可以获得相关学分。

怎样报考? FLYabroad

参见： 学术考试规定

如果你必须参加学术考试，那么，请下载： 学术考试申请

**注意：**虽然你不必一次同时参加所有的考试，但是，你必须确保在考试时间截止之前能完成所有的学术考试。

报考费多少? FLYabroad

每场考试 $338.55
推迟考试 $194.25
Examination re-read per examination $257.85

我可以使用考试费用抵免个人收入所得税吗? FLYabroad

自2011年起，联邦预算提出允许使用该考试费用抵免税收。详见： 联邦政府官网。

What Are the Examination Dates and Deadlines?

Application
Sent to You

Examination Session

Deadline to Apply
January May February
July December August

What do I need to study?

You need to study the topics as listed for an examination, as outlined in the Engineering or Geoscience syllabus. Note that the examination will be based on these topics only.

You may use any textbooks you wish; however, you may want to refer to your specific syllabus for a list of recommended textbooks. Note that for those applying to write geoscience examinations that you will be contacted regarding the recommended study material. These textbooks are not available at APEGBC.

Academic examinations assigned on a confirmatory basis may not be replaced by completion of a course; however academic examinations assigned due to missing topic coverage in a candidate’s academic background may be completed by taking courses acceptable for credit at a university faculty of applied science or science (note: syllabus topics may not be able to be covered by a one-semester course). Candidates who wish to submit courses for consideration for coverage of a syllabus topic must provide a detailed course outline with a completed self-assessment form (for this form, see the discipline-specific syllabus).

If you have been assigned examinations after a detailed assessment of your non-engineering degree against the syllabus of required topics in your discipline of engineering, please note that some of your experience prior to completing the assigned topics may not be credited towards the required four years of satisfactory experience until all assessed deficiencies have been cleared either by successfully completing the examinations, or by passing approved equivalent courses. Credit is typically given for up to one year of experience gained prior to completion of academic requirements if it meets APEGBC’s Competency Framework or Satisfactory Experience Guidelines and is supervised by an appropriate professional. This is examined on a case-by-case basis.

How Do I Apply to Write an Examination?

Please refer to the Academic Examination Regulations for important information about the examinations.

If you have already been assigned academic examinations and wish to apply, please download the Academic Exam Application package.

Note that you do not need to take all of the assigned examinations at one time. However, you must make sure that you finish your academic examinations before your examination deadline, as specified in your exam assignment letter.

How Much Does it Cost?

Per examination $338.55
Defer examination to a subsequent session $194.25
Examination re-read per examination $257.85

Can I Claim the Exam Fees on My Income Taxes?

For 2011 and subsequent years, the federal budget proposes to allow a tax credit for examination fees paid to an institution for examinations taken in the year if the examination is required to obtain a professional status recognized by federal or provincial statute. For more information, please consult the federal government website.

专业实践考试 FLYabroad

你只有通过专业实践考试，才可能成为注册专业人士或注册专业许可人士。考试时间一共3.5个小时，其中包括2.5个小时的110个多项选择考试和1个小时的写作考试。该考试旨在检测你对加拿大专业实践、法律和道德的了解程度。

如果你已经递交了完整的注册或许可申请，且支付了必要的申请费用，那么，你就可以报考专业实践考试。在APEGBC可以购买相关准备资料。

如果你满足下列条件，那么，你就可以不参加专业实践考试：

  • 正在通过Inter-Association Mobility Agreement申请注册/许可，且是专业工程师、专业地球科学家、专业地质学家、专业地球物理学家、工程师或地质学家，且在加拿大其他协会拥有良好声誉
  • 之前通过了加拿大工程师协会或加拿大地球科学家协会组织的专业实践考试
  • 最近3年内曾是一名执业会员
  • 目前是非执业会员，但是，最近3年内曾是一名执业会员，且正在申请恢复执业权利

注意：注册专业实践考试不等于注册道德与法律研讨会。

我可以报考吗? FLYabroad

只有满足下列条件时，你才可以报考：目前是APEGBC受训工程师或受训地球科学家；或者向APEGBC递交了完整的申请（成为专业工程师、专业地球科学家、Eng.L 或 Geo.L）。

会员申请 FLYabroad

你可以使用 会员在线申请 >> 申请成为专业会员（专业工程师或专业地球科学家）或获得有限的许可（Eng.L. 或 Geo.L.）。

考试时间是什么时候? FLYabroad

考试时间

专业实践考试报名截止日期

相关法律与道德研讨会日期
2015年7月20日 2015年6月3日 2015年5月28日、29日
2015年10月19日* 2015年8月28日 2015年8月27日、28日
2016年1月18日* 2015年11月27日 TBA
2016年4月18日* 2016年2月26日 TBA

*These sessions will be in the new Computer-Based Testing (CBT) format

怎样准备考试? FLYabroad

基本备考资料:

欲购买准备资料，请到网上商店。 有关考试模拟题，见： 专业实践考试。

专业实践考试：考试时间是1个小时，考试内容是在所给的3个话题中任选一个进行写作，评分标准是对话题的理解程度以及写作能力。

注意:法律与道德研讨会和/或相关光盘套装不能替代学习资料，它只是补充资料。

最多可以报考几次？ FLYabroad

你最多可以连续报考3次。注意：每次报考都必须支付考试费。如果你连续3次都未能通过考试，那么，你只能等到12个月后再次报考。连续3次未能通过考试之后，之后的报考都必须向注册协会邮递考试申请信。

在哪儿可以找到考试报名表？ FLYabroad

目前是APEGBC实习工程师或实习地球科学家或者是相关申请者可以通过会员入口 报考并支付专业实践考试。

报名费是多少? FLYabroad

在加拿大报名
$241.50
在美国报名
$299.25
不在加拿大和美国报名
$341.25
推迟考试
$52.50
再次参加写作部分（多项选择部分已通过）
$105.00
学习资料
Canadian Professional Engineering and Geoscience: Practice and Ethics by G. C. Andrews
从APEGBC办公处邮购
$120.00 $138.00
Practical Law of Architecture, Engineering, and Geoscience, Canadian Edition by B. M. Samuels and D. R. Sanders
从APEGBC办公处邮购
 $ 94.00 $112.00
Study Kit (2 texts)
从APEGBC办公处邮购
 $214.00 $238.99

我可以使用考试费用抵免个人收入所得税吗? FLYabroad

自2011年起，联邦预算提出允许使用该考试费用抵免税收。详见： 联邦政府官网。

Professional Practice Examination

Before being granted registration as a professional member or licensee, you must pass the Professional Practice Examination. The exam is three and a half hours in length and consists of a two and a half hour, 110 question multiple-choice section followed by a one hour essay section. The exam tests your knowledge of Canadian professional practice, law, and ethics.



The Professional Practice Examination can be attempted after you have submitted a completed application for registration or licence and have paid the required application fee. Materials are available for purchase from the APEGBC office.

You do not have to take the Professional Practice Examination if:

  • You are applying for registration/licence under the Inter-Association Mobility Agreement and are a professional engineer, professional geoscientist, professional geologist, professional geophysicist, ingénieur(e) or géologue in good standing with another Canadian association/ordre ; or
  • You have previously passed a professional practice examination for an Engineers Canada or Geoscientists Canada constituent association/ordre
  • You are a former member whose practice rights have lapsed for three years or less; or
  • You are a non-practising member applying for reinstatement of practice rights that have lapsed for three years or less

Please note that registering for the Professional Practice Exam will not automatically register you for the Law and Ethics Seminar.

Please note that registering for the Professional Practice Exam will not automatically register you for the Law and Ethics Seminar.

Do I Qualify to Write the Exam?

You qualify to write the examination if you are a current EIT or GIT member of APEGBC, or have submitted a completed application for P.Eng, P.Geo., Eng.L, or Geo.L status to APEGBC.

Membership Application

W​hat are the Exam Dates?

Exam Date

Professional Practice Exam Application Deadline Date

Corresponding Law and Ethics Seminar Dates
July 20, 2015 June 3, 2015 May 28 - 29, 2015
October 19, 2015* August 28, 2015 August 27 - 28, 2015
January 18, 2016* November 27, 2015 TBA
April 18, 2016* February 26, 2016 TBA

*These sessions will be in the new Computer-Based Testing (CBT) format

What do I Need to Study?

The primary literature required to prepare for the exam is:

Please visit the Online Store to purchase the study material. Some sample questions are available in the Professional Practice Examination Application Package.

A condensed sample exam is now available on APEGA’s website. Please note a fee is required. If interested, please visit the following link.

The one hour Professional Practice Exam essay involves being required to select one out of three topics to develop into a written answer. You will be graded on your level of comprehension of what the topic is asking as well as your ability to communicate your response in writing. There is no additional cost for writing the essay.

Please be aware that the Law and Ethics Seminar and/or CD-Rom set is not an alternative to studying the textbooks. The seminar is supplementary material only.

How Many Times Can I Write this Exam?

You can write this examination three times. Please note that for each time you write, you have to pay the examination fee. Those who fail to pass the Professional Practice Exam in three sessions are required to wait 12 months before attempting the examination for a fourth time. All fourth or subsequent attempts will require a letter addressed to the Registration Committee requesting permission to attempt the exam again.

Where Can I Find the Exam Application Form?

  • Current EIT or GIT members and applicants of APEGBC can apply and pay for the Professional Practice Exam through the Member Portal

How Much Does it C​ost?

Written in Canada
$241.50
Written in the U.S.
$299.25
Written outside of Canada or the U.S.
$341.25
Deferral to a later session
$52.50
Re-take Essay section only (if Multiple Choice section passed)
$105.00
Study Texts
Canadian Professional Engineering and Geoscience: Practice and Ethics by G. C. Andrews
Picked up from APEGBC office Mailed
 $120.00 $138.00
Practical Law of Architecture, Engineering, and Geoscience, Canadian Edition by B. M. Samuels and D. R. Sanders
Picked up from APEGBC office Mailed
 $ 94.00 $112.00
Study Kit (2 texts)
Picked up from APEGBC office Mailed
 $214.00 $238.99

Can I Claim the Exam Fees on My Income Taxes?

Beginning in 2011 and subsequent years, the federal government is allowing a tax credit for examination fees paid to an institution for examinations taken in the year, if the examination is required to obtain a professional status recognized by federal or provincial statute. For more information, please consult the federal government

法律与道德研讨会 FLYabroad

只要你在英属哥伦比亚申请注册专业工程师、专业地球科学家或有限的许可，你就必须参加法律与道德项目。你可以通过下列途径满足该要求：

  • 亲自参加法律与道德研讨会

或者

  • 从APEGBC直接购买并观看法律与道德研讨会光盘（完成之后，签署相关声明，证明自己确实已经观看了光盘中的全部内容。）

有关法律与道德经常提问的问题，见：这里。

专业实践考试 FLYabroad

注册法律与道德研讨会不等于注册 专业实践考试。

该研讨会并不是专业实践考试的准备课程。有关准备考试，见： 专业实践考试。

更多内容，请联系 报名处： mailto:register@apeg.bc.ca

Law and Ethics Seminar

All applicants for registration as professional engineers, professional geoscientists or limited licence in British Columbia are required to complete the Law and Ethics program. This requirement may be met in one of two ways:

  1. By attending the Law and Ethics seminar in person.

Search the Events page >

  1. By purchasing (directly from APEGBC) and viewing the CD version of the Law and Ethics seminar. Upon completion, the candidate must sign a declaration that he/she has viewed the contents of the CD set in their entirety.

Go to the Online Store >
Download the CD order form >

The Law and Ethics frequently asked questions provide more information on the requirement to complete the Law and Ethics program for professional registration.

Professional Practice Exam

Please note that registering for the Law and Ethics seminar will not automatically register you for the Professional Practice Exam.
Please note that this seminar is not a prepatory course for the Professional Practice Exam. Go to Professional Practice Exam for information on what to study.

For more information about the exam, textbooks, registration process or to register for the Professional Practice Exam, please contact our Registration department.

以上内容由飞出国论坛（FCGvisa.com）独家整理完成，请尊重知识产权，转载请保留并注明出处。