ANZSCO 3942 木工机械师和其他木材业技工 WOOD MACHINISTS AND OTHER WOOD TRADES WORKERS - FLYabroad

飞出国论坛综合 ANZSCO
1

ANZSCO 3942 木工机械师和其他木材业技工 WOOD MACHINISTS AND OTHER WOOD TRADES WORKERS - FLYabroad

ANZSCO 3942 木工机械师和其他木材业技工职责概述 - FLYabroad

  • 设置和操作木材加工机器和车床使木材成型，为家具打光，制作相框和上色、拍照和完成其它艺术品WOOD MACHINISTS AND OTHER WOOD TRADES WORKERS set up and operate woodworking machines and wood turning lathes to shape wood stock,finish and polish furniture, and make picture frames and frame paintings, photographs and other artwork.

ANZSCO 3942 木工机械师和其他木材业技工技能要求 Indicative Skill Level - FLYabroad

  • 本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
  • 在澳洲：AQF证书3级，包括至少2年的在职培训或AQF证书IV级（ANZSCO技术3级）In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
  • 在新西兰：NNZ资格证4级（ANZSCO技术3级）In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
  • 至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
  • 有时除了资格证外，还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification

ANZSCO 3942 木工机械师和其他木材业技工主要职责 Tasks Include - FLYabroad

  • 研究图纸、定单和样品以确定参数。studying drawings, work orders and sample parts to determine specifications
  • 确定工具和机器要求以及操作顺序。determining tooling and machine requirements and sequence of operations
  • 设置木工机床以改正切割、刨平、转动、塑造和沙盖。setting up woodworking machines and wood stock for correct cutting, planning, turning, shaping and sanding
  • 使用机器切割、刨平、转动、塑造和以沙掩盖被加工件。operating machines to cut, plane, turn, shape and sand work pieces
  • 使用钢丝绒和玻璃纸，并通过溶剂和除漆剂来去除旧成品，通过刮擦去除软化面。removing old finishes by stripping with steel wool and glasspaper, and by applying solvents and paint strippers, and removing softened finishes by scraping
  • 使用清漆、虫漆、亮漆、染色剂和颜料粉刷表面，为加工面抛光和打蜡。applying varnish, shellac, lacquer, stains and paint to surfaces and polishing and waxing finished surfaces
  • 安装和固定框架。fitting and fastening frame pieces
  • 安装框架的基底材料和主题。mounting backing materials and subjects for framing

ANZSCO 3942 木工机械师和其他木材业技工职位列表 List of occupations - FLYabroad

394211 家具涂漆工 FURNITURE FINISHER

  • 使用抛光剂，如着色剂、亮漆、颜料、清漆，为加工面抛光和打蜡。Applies finishes, such as stain, lacquer, paint, oil and varnish, to furniture, and polishes and waxes finished furniture surfaces.
  • 技术等级 Skill Level: 3
  • 专业方向： Specialisation:
  • French Polisher

394212 画框制作者 PICTURE FRAMER

  • 切割和组装模具来制作相框和上色、拍照和完成其它艺术品。Cuts out and assembles mouldings to make picture frames, and frames paintings, photographs, needlework and other artwork.
  • 技术等级 Skill Level: 3

394213 木材机械工 WOOD MACHINIST

  • 切割、刨平、转动、塑造和以沙掩盖木材。Cuts, planes, turns, shapes and sands wood stock to specifications.
  • 技术等级 Skill Level: 3
  • 职业方向 Specialisations:
  • 自动剖面砂光机操作员 Automatic Profile Sander Operator
  • 靠模车床族操作员 Copy Lathe Operator
  • 封边机操作员 Edge Bander Operator
  • 夹具工 Jigmaker (Wood)
  • 板锯操作员 Panel Saw Operator
  • 木工机床安装员 Woodworking Machine Setter

394214 木旋工 WOOD TURNER

  • 操作木料旋转车床来旋转和塑造木材。Operates wood turning lathes to turn and shape wood stock.
  • 技术等级 Skill Level: 3

394299 木工机械师和其他木材业技工类 WOOD MACHINISTS AND OTHER WOOD TRADES WORKERS NEC

  • 包括在其他地方未分类的木工机械师和木材业技工。This occupation group covers Wood Machinists and Wood Trades Workers not elsewhere classified.
  • 技术等级 Skill Level: 3
  • 职位：Occupations in this group include:
  • 藤制家具制作工 Cane Furniture Maker
  • 木材模型制作工 Cooper Wood Model Maker

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。

2
  • 在接下来5年里，截止到2019年11月，木工机械师和木材业技工的职位空缺预计会低于平均水平（等于或少于5000）。职位空缺包括就业增长和人员流动（人员流动指的是工人的换岗或者离职）
  • 在过去5年中，此职业的就业情况处于相对稳定状态（按百分比计算），长期来看（10年）会下降。预计到2019年11月，木工机械师和木材业技工职业的就业将会下降。
  • 这是一个需求量小的职业（2014年11月的需求量为7400个），表明部分地区就业机会相当有限。
  • 木工机械师和木材业技工职位全职工作的比例高于平均水平（为77.9 %）。对于全职工作的木工机械师和木材业技工，每周平均工作43.1小时（所有职位的平均小时为40.9），收入低于平均水平-在第 3 档。木工机械师和木材业技工职业的失业率高于平均水平。
  • 木工机械师和木材业技工职业的最常见的教育水平为三级或四级水平，其中约占35.7%
  • 木工机械师和木材业技工主要受雇于制造业、零售贸易和批发贸易业。
  • Over the five years to November 2019, the number of job openings for Wood Machinists and Other Wood Trades Workers is expected to be low (equal to or less than 5,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.
  • Employment for this occupation remained relatively steady in the past five years and fell in the long-term (ten years). Looking forward, employment for Wood Machinists and Other Wood Trades Workers to November 2019 is expected to decline.
  • This is a small occupation (7400 in November 2014) suggesting that opportunities may be quite limited in some regions.
  • Wood Machinists and Other Wood Trades Workers have an above average proportion of full-time jobs (77.9 per cent). For Wood Machinists and Other Wood Trades Workers working full-time, average weekly hours are 43.1 (compared to 40.9 for all occupations) and earnings are below average - in the third decile. Unemployment for Wood Machinists and Other Wood Trades Workers is above average.
  • The most common level of educational attainment for Wood Machinists and Other Wood Trades Workers is Certificate III/IV (35.7 per cent).
  • Wood Machinists and Other Wood Trades Workers are mainly employed in Manufacturing, Retail Trade and Wholesale Trade.

Key Indicators

Key Indicators graph - see table below for a summary

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.

3942 Job Prospects

3942 职业统计数据 Statistics

  • 周薪（税前）Weekly Earnings (before tax)

周薪（税前）Weekly Earnings (before tax)

  • 就业水平 Employment Level (thousands)

就业水平 Employment Level (thousands)

  • 增长比例 Recent Job Growth (per cent)

增长比例 Recent Job Growth (per cent)

  • 按性别计算就业增长 Employment Growth by Gender (thousands)

按性别计算就业增长 Employment Growth by Gender (thousands)

  • 性别比例 Gender (per cent share)

性别比例 Gender (per cent share)

  • 周工作小时数 Weekly Hours Worked

周工作小时数 Weekly Hours Worked

  • 年龄 Age Profile (per cent share)

年龄 Age Profile (per cent share)

  • 各州就业比例 Employment by State and Territory (per cent share)

各州就业比例 Employment by State and Territory (per cent share)

  • 所在行业 Main Employing Industries (per cent share)

所在行业 Main Employing Industries (per cent share)

  • 教育程度 Educational Attainment (per cent of employment)

教育程度 Educational Attainment (per cent of employment)

3942 职业找工作信息

数据来源： abs.gov.au 及 joboutlook.gov.au

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。