NOC 94123 锯材分级员和其他木材加工检验员和分级员 | Lumber graders and other wood processing inspectors and graders
加拿大 NOC 94123 锯材分级员和其他木材加工检验员和分级员（Lumber graders and other wood processing inspectors and graders）属于TEER 1 级的职业，负责检查和分级锯材、木瓦、胶合板和类似的木材产品，以识别缺陷，确保符合公司规格，并根据行业标准对产品进行分类。该职位要求完成中学教育，通常提供在职培训和课堂培训，要求具备相关经验，需要省级木材协会颁发的锯材分级员执照。
| NOC | NOC 2021 最新版本 |
|---|---|
 职业名称 |
锯材分级员和其他木材加工检验员和分级员 Lumber graders and other wood processing inspectors and graders |
 NOC 代码 |
94123 |
 TEER 等级 |
Level 1 |
 职业分类 |
制造业和公用事业职业（9） - 加工、制造和印刷业的机器操作员、装配工和检验员（94） - 加工和制造机器操作员及相关生产工人（941） |
职业概述
加拿大 NOC 94123 锯材分级员和其他木材加工检验员和分级员检查和分级锯材、木瓦、胶合板和类似的木材产品，以识别缺陷，确保符合公司规格，并根据行业标准对产品进行分类。他们被聘用于锯木厂、平面 mills、木材处理厂、刨花板厂和其他木材加工公司。
示例职位（8个）| Example Titles (8 titles)
- 木材加工分级员 | Grader - wood processing
- 木材加工分级统计员 | Grader tallyman/woman - wood processing
- 锯材分级员 | Lumber grader
- 刨花板分级员 - 木材加工 | Particleboard grader - wood processing
- 胶合板分级员 | Plywood grader
- 胶合板检验员 | Plywood inspector
- 单板分级员 | Veneer grader
- 木材测量员 | Wood measurer
主要职责 | Main Duties
检查锯材的结节、孔洞、裂纹和其他缺陷，并分类进行进一步干燥、修剪或再制造
使用卡尺、量规和卷尺测量锯材，确保指定的厚度、长度和宽度- 根据行业标准对锯材进行分类和排序，并在锯材上盖章标明等级、木材类型、含水率和其他特征
统计锯材
完成并维护报告- 检查胶合板面板、单板、面板、木瓦和类似的木材产品，查看结节、孔洞、裂纹、直线度和其他缺陷
- 标记缺陷并分类进行维修或再加工
- 使用标准测量仪器测量木材产品，确保符合规格
- 根据质量标准对木材产品进行分级和贴标签
- 完成并维护检验和分级报告
就业要求 | Employment Requirements
完成中学教育通常要求- 为锯材分级员提供在职培训和最多两周的课堂培训
- 对于此单位组中的分级员和检验员，通常要求具备锯木厂机器操作员、其他木材加工操作员或木材加工劳工的经验
- 锯材分级员需要省级木材协会颁发的锯材分级员执照
附加信息
- 在处理类似木材产品的雇主之间存在一定的流动性
所有职位（32个）| All Titles (32 titles)
- 板材分级员 - 木材加工 | Board grader - wood processing
- 地板分级员 - 木材加工 | Flooring grader - wood processing
- 木材加工分级员 | Grader - wood processing
- 木材加工分级统计员 | Grader tallyman/woman - wood processing
- 绿色锯材分级员 | Green lumber grader
- 检验员 - 木材加工 | Inspector - wood processing
- 锯材分级员 | Lumber grader
- 锯材检验员 | Lumber inspector
- 锯材标记员 | Lumber marker
- 面板检验员 - 木材加工 | Panel inspector - wood processing
- 刨花板分级员 - 木材加工 | Particleboard grader - wood processing
- 平面分级员 - 木材加工 | Planer grader - wood processing
- 平面 mill 分级员 - 木材加工 | Planer mill grader - wood processing
- 胶合板和单板匹配员 - 木材加工 | Plywood and veneer matcher - wood processing
- 胶合板分级员 | Plywood grader
- 胶合板分级员 - 木材加工 | Plywood grader - wood processing
- 胶合板检验员 | Plywood inspector
- 胶合板检验员 - 木材加工 | Plywood inspector - wood processing
- 电线杆检验员 - 木材加工 | Pole inspector - wood processing
- 木瓦检验员 - 木材加工 | Shake inspector - wood processing
- 木瓦检验员 - 木材加工 | Shingle inspector - wood processing
- 桩分级员 - 木材加工 | Stake grader - wood processing
- 枕木和木材检验员 | Tie and timber inspector
- 处理过的电线杆测试员 - 木材加工 | Treated pole tester - wood processing
- 单板和胶合板分级员 - 木材加工 | Veneer and plywood grader - wood processing
- 单板分级员 | Veneer grader
- 单板分级员 - 木材加工 | Veneer grader - wood processing
- 木材标记员 - 木材加工 | Wood marker - wood processing
- 木材测量员 | Wood measurer
- 木材测量员 - 木材加工 | Wood measurer - wood processing
- 木材加工分级员 | Wood processing grader
- 木材加工检验员 | Wood processing inspector
排除职业 | Exclusions
- 森林产品技术员 (22100) | Forest products technologist (in22100 Chemical technologists and technicians)
- 原木测量员 (22112) | Log scaler (in22112 Forestry technologists and technicians)
- 生产技术员 - 锯木厂 (22302) | Production technologist - sawmill (in22302 Industrial engineering and manufacturing technologists and technicians)
- 监督员，森林产品加工 (92014) | Supervisors, forest products processing (92014)
Canada National Occupational Classification (NOC)
Code: 94123
Title: Lumber graders and other wood processing inspectors and graders
Type: Unit Group
Level: 5
Occupational Overview
Lumber graders and other wood processing inspectors and graders inspect and grade lumber, shingles, veneer, waferboard and similar wood products to identify defects, ensure conformance to company specifications and classify products according to industry standards. They are employed by sawmills, planing mills, wood treatment plants, waferboard plants and other wood processing companies.
Example Titles (8 titles)
- Grader - wood processing
- Grader tallyman/woman - wood processing
- Lumber grader
- Particleboard grader - wood processing
- Plywood grader
- Plywood inspector
- Veneer grader
- Wood measurer
Main Duties
- Examine lumber visually for knots, holes, splits and other defects and sort for further drying, trimming or remanufacturing
- Measure lumber using callipers, gauges and tape measures to ensure specified thickness, length and width
- Classify and sort lumber according to industry standards and stamp lumber to indicate grade, wood type, moisture level and other characteristics
- Tally lumber
- Complete and maintain reports.
- Inspect plywood panels, veneer sheets, panelboards, shingles and similar wood products visually for knots, holes, splits, straightness and other defects
- Mark defects and sort for repair or reprocessing
- Measure wood products to ensure conformance to specifications using standard measuring instruments
- Grade and label wood products according to quality standards
- Complete and maintain inspection and grading reports.
Employment Requirements
- Completion of secondary school is usually required.
- On-the-job training and up to two weeks of classroom training are provided for lumber graders.
- Previous experience as a sawmill machine operator, other wood processing operator or as a labourer in wood processing is usually required for graders and inspectors in this unit group.
- Lumber graders require a lumber grader’s licence issued by a provincial lumber association.
Additional Information
- There is some mobility between employers processing similar wood products.
All Titles (32 titles)
- Board grader - wood processing
- Flooring grader - wood processing
- Grader - wood processing
- Grader tallyman/woman - wood processing
- Green lumber grader
- Inspector - wood processing
- Lumber grader
- Lumber inspector
- Lumber marker
- Panel inspector - wood processing
- Particleboard grader - wood processing
- Planer grader - wood processing
- Planer mill grader - wood processing
- Plywood and veneer matcher - wood processing
- Plywood grader
- Plywood grader - wood processing
- Plywood inspector
- Plywood inspector - wood processing
- Pole inspector - wood processing
- Shake inspector - wood processing
- Shingle inspector - wood processing
- Stake grader - wood processing
- Tie and timber inspector
- Treated pole tester - wood processing
- Veneer and plywood grader - wood processing
- Veneer grader
- Veneer grader - wood processing
- Wood marker - wood processing
- Wood measurer
- Wood measurer - wood processing
- Wood processing grader
- Wood processing inspector
Exclusions
- Forest products technologist (in22100 Chemical technologists and technicians)
- Log scaler (in22112 Forestry technologists and technicians)
- Production technologist - sawmill (in22302 Industrial engineering and manufacturing technologists and technicians)
- Supervisors, forest products processing (92014)
Occupational Classification Breakdown
| Classification Level | Category |
|---|---|
| Broad occupational category | 9 – Occupations in manufacturing and utilities |
| TEER | 4 – Occupations usually require a secondary school diploma; or several weeks of on-the-job training |
| Major group | 94 – Machine operators, assemblers and inspectors in processing, manufacturing and printing |
| Sub-major group | 941 – Processing and manufacturing machine operators and related production workers |
| Minor group | 9412 – Machine operators and related workers in pulp and paper production and wood processing and manufacturing |
| Version | NOC 2021 Version 1.0 |