ANZSCO 3991 造艇者和造船工 BOAT BUILDERS AND SHIPWRIGHTS - FLYabroad

飞出国论坛综合 ANZSCO
1

ANZSCO 3991 造艇者和造船工 BOAT BUILDERS AND SHIPWRIGHTS - FLYabroad

ANZSCO 3991 造艇者和造船工职责概述 - FLYabroad

  • 建造、配备和修理小船和轮船。BOAT BUILDERS AND SHIPWRIGHTS construct, fit out and repair boats and ships.

ANZSCO 3991 造艇者和造船工技能要求 Indicative Skill Level - FLYabroad

  • 本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
  • 在澳洲：AQF证书3级，包括至少2年的在职培训或AQF证书IV级（ANZSCO技术3级）In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
  • 在新西兰：NNZ资格证4级（ANZSCO技术3级）In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
  • 至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
  • 有时除了资格证外，还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification
  • 可能需要注册或登记。Registration or licensing may be required.

ANZSCO 3991 造艇者和造船工主要职责 Tasks Include - FLYabroad

  • 研究计划和参数，准备模板和测量图，并切割船体截面。studying plans and specifications, and preparing templates and scale plans for fabrication and cutting of hull sections
  • 在干船坞和滑道处标注参考点。marking reference points and lines on dry docks and slipways
  • 检查滑道设备的位置和功能。checking position and functioning of slipway apparatus
  • 安装船盖和船体各部分。assembling shells of boats and erecting hull sections of ship
  • 准备和安装发射台，进行预发射测试并监管发射程序。erecting and preparing launching platforms, conducting pre-launch tests and supervising launching procedures
  • 安装桅杆、构架、船板、装备、机器、中轴和安全设备。installing masts, frames, decking, fittings, machines, shafts and safety equipment
  • 建造和安装如船舱、机械配件、螺旋桨支架和船舵等结构。building and installing structures such as cabins, machine mountings, propeller supports and rudders
  • 确定维修要求和程序。determining repair requirements and procedures
  • 可能要制作船体模具，使用下述材料制造和修复船舶：铝、木材、玻璃、强化塑料、碳纤维、纤维B、玻璃纤维和混凝土。may make hull moulds and fabricate and repair vessels using materials such as aluminium, wood, glass, reinforced plastics, carbon fibre, Kevlar, fibreglass and concrete

ANZSCO 3991 造艇者和造船工职位列表 List of occupations - FLYabroad

399111 造艇者和修理工 BOAT BUILDER AND REPAIRER

  • 建造、修理和修改小船。Builds, repairs and modifies boats.
  • 可能需要注册或许可。Registration or licensing may be required.
  • 技术等级：3 Skill Level: 3
  • 职业方向 Specialisations:
  • 复合船建造者 Composite Boat Builder
  • 装配工 Rigger (Boat)
  • 晶石制造者 Sparmaker
  • 木船建造者 Wooden Boat Builder
  • 游艇建造者 Yacht Builder

399112 造船工 Shipwright

  • 设计、布置和修理轮船。Constructs, fits out and repairs ships.
  • 需要注册或许可。Registration or licensing is required.
  • 技术等级：3 Skill Level: 3
  • 职业方向 Specialisations:
  • 放样员（船舶）Loftsman/woman (Marine)
  • 造船木匠 Ship’s Carpenter

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。

2
  • 在接下来5年里，截止到2019年11月，造船工的职位空缺预计会低于平均水平（等于或少于5000）。职位空缺包括就业增长和人员流动（人员流动指的是工人的换岗或者离职）- 在过去5年中，此职业的就业情况处于强劲增长状态（按百分比计算），长期来看（10年）会明显下降。预计到2019年11月，汽车电工职业的就业将会缓慢增长。
  • 这是一个需求量小的职业（2014年11月的需求量为4200个），表明部分地区就业机会相当有限。
  • 造船工职位全职工作的比例高（为82.1%）。对于全职工作的造船工，每周平均工作41.2 小时（所有职位的平均小时为40.9），收入处于平均水平-在第 6 档。造船工职业的失业率处于平均水平。
  • 造船工职业的最常见的教育水平为三级或四级水平 100%
  • 造船工主要受雇于制造业、交通运输业、邮政与仓储业、农林渔业等。
  • Over the five years to November 2019, the number of job openings for Boat Builders and Shipwrights is expected to be low (equal to or less than 5,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.
  • Employment for this occupation rose strongly (in percentage terms) in the past five years and fell markedly in the long-term (ten years). Looking forward, employment for Boat Builders and Shipwrights to November 2019 is expected to grow moderately.
  • This is a very small occupation (4200 in November 2014) suggesting that opportunities may be quite limited in some regions.
  • Boat Builders and Shipwrights have an above average proportion of full-time jobs (82.1 per cent). For Boat Builders and Shipwrights working full-time, average weekly hours are 41.2 (compared to 40.9 for all occupations) and earnings are average - in the sixth decile. Unemployment for Boat Builders and Shipwrights is average.
  • The most common level of educational attainment for Boat Builders and Shipwrights is Certificate III/IV (100 per cent).
  • Boat Builders and Shipwrights are mainly employed in Manufacturing, Transport, Postal and Warehousing and Agriculture, Forestry and Fishing.

Key Indicators

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.

3991 Job Prospects

3991 职业统计数据 Statistics

  • 周薪（税前）Weekly Earnings (before tax)

  • 就业水平 Employment Level (thousands)

  • 增长比例 Recent Job Growth (per cent)

  • 按性别计算就业增长 Employment Growth by Gender (thousands)

  • 性别比例 Gender (per cent share)

  • 周工作小时数 Weekly Hours Worked

  • 年龄 Age Profile (per cent share)

  • 各州就业比例 Employment by State and Territory (per cent share)

  • 所在行业 Main Employing Industries (per cent share)

  • 教育程度 Educational Attainment (per cent of employment)

教育程度 Educational Attainment (per cent of employment)

3991 职业找工作信息

数据来源： abs.gov.au 及 joboutlook.gov.au

本文由飞出国（FLYabroad @Copyright）独家整理完成，请尊重知识产权，不要以任何形式散布和传播。