ANZSCO 3234 工具匠与工程制模师 Toolmakers and Engineering Patternmakers - FLYabroad

ANZSCO 3234 工具匠与工程制模师 Toolmakers and Engineering Patternmakers - FLYabroad

ANZSCO 3234 工具匠与工程制模师职责概述 - FLYabroad

  • 工具制造工,工程制模师维修工具,模具,钻模,卡具等其他精密仪器,设备.TOOLMAKERS AND ENGINEERING PATTERNMAKERS make and repair tools, dies, jigs, fixtures and other precision parts and equipment to fine tolerances for machine tools and other production machinery, and construct full-size engineering, visual and experimental models and models for the manufacture of prototype developmental products.

ANZSCO 3234 工具匠与工程制模师技能要求 Indicative Skill Level - FLYabroad

  • 本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
  • 在澳洲:AQF证书3级,包括至少2年的在职培训或AQF证书IV级(ANZSCO技术3级)In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
  • 在新西兰:NNZ资格证4级(ANZSCO技术3级)In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
  • 至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
  • 有时除了资格证外,还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification

ANZSCO 3234 工具匠与工程制模师主要职责 Tasks Include - FLYabroad

  • 研究图纸,规格以确定物品的规模与尺寸。 studying drawings and specifications to determine dimensions and tolerances of articles to be manufactured and models to be constructed
  • 用不同仪表进行测量并对金属原料与铸件进行标记。measuring and marking out metal stock and castings using various gauges
  • 使用机床对金属和木材成品进行成形处理。shaping metal and wood stock using machine tools
  • 检查成品和最终模型的精度,使用精密测量仪器。checking accuracy of manufactured articles and finished patterns to fine tolerances, using precision measuring instruments
  • 测试和修改成品。testing and modifying manufactured articles
  • 应用保护涂层,为模型截面上漆。applying protective finishes to patterns and painting pattern sections to indicate method of assembly
  • 重组模型截面,对半成品进行成形处理。assembling pattern sections and shaping work pieces to specified finish
  • 给模具浇注材料,并分散模具外的材料;制作玻璃纤维织布和塑料树脂的薄片。pouring and spreading materials into moulds and over models of patterns, and building laminations of fibreglass cloth and plastic resin to fabricate patterns
  • 修理破损的模型,校正模型以弥补铸件的瑕疵。repairing broken and damaged patterns and correcting patterns to compensate for defects in casting
  • 为布局和检查制造模板。constructing templates for layout and inspection

ANZSCO 3234 工具匠与工程制模师职位列表 List of occupations - FLYabroad

323411 工程制模师 Engineering Patternmaker

  • 用木材构建全尺寸工程模型,常用于制造业为汽车、飞机或玻璃纤维生产金属铸件、模型、模具、真空模具等Constructs full-size engineering models usually made out of timber, which are used in manufacturing to produce metal castings, copy models, vacuum form tooling and tooling for the automotive, aircraft or fibreglass industries.
  • 技术级别:3 Skill Level: 3

323412 工具匠 Toolmaker

  • 制造和修理工具、模具、夹具等精密零件和设备,配合机床等机械设备的生产Makes and repairs tools, dies, jigs, fixtures and other precision parts and equipment to fine tolerances for machine tools and other production machinery
  • 技术级别:3 Skill Level: 3
  • 职业方向: Specialisations:
  • 铸模工 Die Caster
  • 制模师 Die Sinker
  • Jigmaker (Metal)
  • 塑料模具制造商 Plastic Mould Maker
  • 冲压工具制造商 Press-tool Maker

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。

  • 在接下来5年里,截止到2019年11月,工具匠和工程制模工的职位空缺预计会低于平均水平(等于或少于5000)。职位空缺包括就业增长和人员流动(人员流动指的是工人的换岗或者离职)
  • 在过去5年中,此职业的就业情况处于缓慢下降状态(按百分比计算),长期来看(10年)仍会下降。预计到2019年11月,工具匠和工程制模工职业的就业将会下降。
  • 这是一个需求量非常小的职业(2014年11月的需求量为4800个),表明部分地区就业机会相当有限。
  • 工具匠和工程制模工职位全职工作的比例高(为87.6%)。对于全职工作的工具匠和工程制模工,每周平均工作38.9小时(所有职位的平均小时为40.9),收入处于平均水平-在第5档。工具匠和工程制模工职业的失业率低于平均水平。
  • 工具匠和工程制模工职业的最常见的教育水平为三级或四级水平,其中约占100%
  • 工具匠和工程制模工主要受雇于制造业、教育与培训和其他服务行业。
  • Over the five years to November 2019, the number of job openings for Toolmakers and Engineering Patternmakers is expected to be low (equal to or less than 5,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.
  • Employment for this occupation fell slightly in the past five years and fell in the long-term (ten years). Looking forward, employment for Toolmakers and Engineering Patternmakers to November 2019 is expected to decline.
  • This is a very small occupation (4800 in November 2014) suggesting that opportunities may be quite limited in some regions.
  • Toolmakers and Engineering Patternmakers have a high proportion of full-time jobs (87.6 per cent). For Toolmakers and Engineering Patternmakers working full-time, average weekly hours are 38.9 (compared to 40.9 for all occupations) and earnings are average - in the fifth decile. Unemployment for Toolmakers and Engineering Patternmakers is below average.
  • The most common level of educational attainment for Toolmakers and Engineering Patternmakers is Certificate III/IV (100 per cent).
  • Toolmakers and Engineering Patternmakers are mainly employed in Manufacturing, Education and Training and Other Services.

Key Indicators

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.

3234 Job Prospects

3234 职业统计数据 Statistics

  • 周薪(税前)Weekly Earnings (before tax)

  • 就业水平 Employment Level (thousands)

  • 增长比例 Recent Job Growth (per cent)

  • 按性别计算就业增长 Employment Growth by Gender (thousands)

  • 性别比例 Gender (per cent share)

  • 周工作小时数 Weekly Hours Worked

  • 年龄 Age Profile (per cent share)

  • 各州就业比例 Employment by State and Territory (per cent share)

  • 所在行业 Main Employing Industries (per cent share)

  • 教育程度 Educational Attainment (per cent of employment)

3234 职业找工作信息

数据来源: abs.gov.au 及 joboutlook.gov.au

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。