ANZSCO 3994 珠宝工匠 JEWELLERS - FLYabroad

ANZSCO 3994 珠宝工匠 JEWELLERS - FLYabroad

ANZSCO 3994 珠宝工匠职责概述 - FLYabroad

  • 制造和修补珠宝(戒指、胸针、手镯和工艺品),对粗糙的宝石进行切割、塑造和磨光,以使其成为时尚的工业宝石。。JEWELLERS make and repair jewellery such as rings, brooches, chains and bracelets, craft objects out of precious metals,and cut, shape and polish rough gemstones to produce fashion and industrial jewels.

ANZSCO 3994 珠宝工匠技能要求 Indicative Skill Level - FLYabroad

  • 本单元的大多数职位需要具有与下述资质和经验相当的技术层次。Most occupations in this unit group have a level of skill commensurate with the qualifications and experience outlined below
  • 在澳洲:AQF证书3级,包括至少2年的在职培训或AQF证书IV级或至少3年的相关工作经验(ANZSCO技术3级)In Australia: AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
  • 在新西兰:NNZ资格证4级(ANZSCO技术3级)In New Zealand: NZ Register Level 4 qualification (ANZSCO Skill Level 3)
  • 至少3年的工作经验可以代替上述的资格证。At least three years of relevant experience may substitute for the formal qualifications listed above.
  • 有时除了资格证外,还需要相关的工作经验和/或在职培训。In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification

ANZSCO 3994 珠宝工匠主要职责 Tasks Include - FLYabroad

  • 检查珠宝和贵重金属的设计方案和参数。examining designs and specifications for jewellery and precious metal objects
  • 使用特殊的手动和电动工具,通过切割、锉削、敲打、旋转和弯曲来塑造发霉的金属。shaping moulded metal by cutting, filing, beating, turning and bending, using specialised hand and power tools
  • 提供焊接、拧紧、铆接等方式来装配首饰。assembling articles by soldering, screwing, riveting and otherwise joining
  • 固定宝石,打磨和检查最终的设定。securing precious stones in retaining prongs and ridges, and smoothing and checking final settings
  • 在戒指、胸针、手镯和其它首饰上雕刻图案。engraving designs on ring settings, brooches, bracelets and other articles
  • 通过焊接、更换和恢复磨损和坏掉的部件来修复珠宝。repairing jewellery by soldering, replacing and rebuilding worn and broken parts
  • 评估珠宝的质量和价值。appraising the quality and value of jewellery
  • 使用精密的手动、电动工具和钻模切割宝石,使其接近最终的形状。cutting and dividing stones to approximate final shape, using precision hand and power tools and jigs
  • 固定宝石,削角,磨光和打磨。securing stones and shapes, cutting angles, smoothing and polishing
  • 通过锉削、砂纸和擦光机来完成加工过程。finishing articles using files, emery paper and buffing machines
  • 重塑旧珠宝。restyling old jewellery

ANZSCO 3994 珠宝工匠职位列表 List of occupations - FLYabroad

399411 珠宝工匠 JEWELLER ###

  • 制造和修复珠宝,使其成为戒指、胸针、手镯和工艺品。对粗糙的宝石进行切割、塑造和磨光,以使其成为时尚的工业宝石。Makes and repairs jewellery such as rings, brooches, chains and bracelets, crafts objects out of precious metals, or cuts, shapes and polishes rough gemstones to produce fashion or industrial jewels.
  • 技术等级:3 Skill Level: 3
  • 职业方向 Specialisations:
  • 宝石切割员 Diamond Cutter
  • 刻面切磨师 Faceter
  • 宝石镶嵌工 Gem Setter
  • 金匠 Goldsmith
  • 宝石工艺匠 Lapidary
  • 猫眼石磨工 Opal Polisher
  • 戒指制作师 Ring Maker
  • 银匠 Silversmith

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。

  • 在接下来5年里,截止到2019年11月,钟表匠的职位空缺预计会低于平均水平(等于或少于5000)。职位空缺包括就业增长和人员流动(人员流动指的是工人的换岗或者离职)
  • 在过去5年中,此职业的就业情况处于缓慢增长状态(按百分比计算),长期来看(10年)会缓慢下降。预计到2019年11月,钟表匠职业的就业将会有所下降。
  • 这是一个需求量非常小的职业(2014年11月的需求量为5100个),表明部分地区就业机会相当有限。
  • 钟表匠职位全职工作的比例处于平均水平(为71.8 %)。对于全职工作的钟表匠,每周平均工作42.4 小时(所有职位的平均小时为40.9)。钟表匠职业的失业率低于平均水平。
  • 钟表匠最常见的教育水平为低于10年级(36.0%)
  • 钟表匠主要受雇于制造业、零售贸易和批发贸易等行业。
  • Over the five years to November 2019, the number of job openings for Jewellers is expected to be low (equal to or less than 5,000). Job openings count both employment growth and turnover (defined as workers leaving their occupation for other employment or leaving the workforce). Further information about job openings and projected employment growth is available on the Help page.
  • Employment for this occupation rose moderately in the past five years and fell slightly in the long-term (ten years). Looking forward, employment for Jewellers to November 2019 is expected to decline.
  • This is a very small occupation (5100 in November 2014) suggesting that opportunities may be quite limited in some regions.
  • Jewellers have an average proportion of full-time jobs (71.8 per cent). For Jewellers working full-time, average weekly hours are 42.4 (compared to 40.9 for all occupations). Unemployment for Jewellers is below average.
  • The most common level of educational attainment for Jewellers is Below Year 10 (36.0 per cent).
  • Jewellers are mainly employed in Manufacturing, Retail Trade and Wholesale Trade.

Key Indicators

These data show 9 key indicators for this occupation - employment size, full-time share of employment, earnings, unemployment, historical employment growth (long-term, medium term and short-term), future employment growth, mix of industries and job openings. Estimates have been rounded and consequently some discrepancies may occur between sums of the component items and totals.

3994 Job Prospects

3994 职业统计数据 Statistics

  • 周薪(税前)Weekly Earnings (before tax)

  • 就业水平 Employment Level (thousands)

  • 增长比例 Recent Job Growth (per cent)

  • 按性别计算就业增长 Employment Growth by Gender (thousands)

  • 性别比例 Gender (per cent share)

  • 周工作小时数 Weekly Hours Worked

  • 年龄 Age Profile (per cent share)

  • 各州就业比例 Employment by State and Territory (per cent share)

  • 所在行业 Main Employing Industries (per cent share)

  • 教育程度 Educational Attainment (per cent of employment)

3994 职业找工作信息

数据来源: abs.gov.au 及 joboutlook.gov.au

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。