312412 电子工程技术员 Electronic Engineering Technician


#1

ANZSCO 312412 电子工程技术员 Electronic Engineering Technician - FLYabroad

312412 电子工程技术员职业描述 Job description - FLYabroad

电子工程技术员进行电子系统的测试,收集并分析数据,协助电子工程师和工程技术人员组装电路图。可能需要注册或许可。

Conducts tests of electronic systems, collects and analyses data, and assembles circuitry in support of Electronics Engineers and Engineering Technologists. Registration or licensing may be required.

Previously referred to in ASCO as:
3124-13 Electronic Engineering Technician

312412 电子工程技术员职位别名 - FLYabroad

  • 312412 机载电子设备技术员 Aircraft Electronics Technical Officer (S)
  • 312412 通讯工程技术员 Communications Engineering Technical Officer (S)
  • 312412 通讯工程技术员 Communications Engineering Technician (S)
  • 312412 数字控制技术员 Digital Controls Technical Officer (S)
  • 312412 数字控制技术员 Flight Surveyor (S)
  • 312412 印刷电路板设计师 Printed Circuit Board Designer (S)
  • 312412 过程控制技术员 Process Control Technician (S)

312412 电子工程技术员技术等级 Skill level - FLYabroad

312412 电子工程技术员所属职业列表 - FLYabroad

312412 电子工程技术员澳洲技术移民职业评估 Skills assessment authority - FLYabroad

  • TRA - 澳大利亚职业技术认证中心 Trades Recognition Australia:大陆技术移民申请的绝大部分职业都是通过该类别评估。TRA移民技术评估类别申请的条件为具有澳洲要提名职业相对等的资格(一般是AQFIII,IV或 Diploma),至少3年的全职提名职业作经验,近2年内至少1年全职带薪提名职业工作经验。对于在获得等同AQF相关资质之前的工作要获得认可的话,需之前至少5年提名职业或者提名职业相关全职工作经验。TRA类别评估周期60工作日,评估费用300澳币,不支持信用卡。

312412 电子工程技术员州担保情况 - FLYabroad

  • 西澳(Schedule 2),北领地

312412 电子工程技术员新西兰技术移民紧缺职业加分要求 - FLYabroad

下列学历之一:

  • NZQF 7级的学士学位,或者具有最低等同360学分的较高资格,包括新西兰电子专业的要求
  • NZQF 6级或更高资格的文凭,最低相当于240学分,其中包括新西兰工程文凭(6级)电子或电气(电子)的信用和知识要求,
  • 工程技术(电子工程)或(电气和电子工程)(NZQF 7级)
  • 电子工程荣誉工程学士或电气与电子工程学士(NZQF 8级)

Long Term Skill Shortage List Requirements - 312412 - flyabroad

Qualifications must be comparable to the standard of the New Zealand qualification listed. Also see Note 1 at the end of this list.

One of the following:

  • A bachelor’s degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in electronics
  • A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the credit and knowledge requirements of the New Zealand Diploma in Engineering (Level 6) Electronic or Electrical (Electronic)
  • Bachelor of Engineering Technology (Electronic Engineering) or (Electrical and Electronic Engineering) (NZQF Level 7)
  • Bachelor of Engineering with Honours in Electronic Engineering, or Electrical and Electronic Engineering (NZQF Level 8)

312412 电子工程技术员执业注册要求(不代表移民要求) - FLYabroad

Registration or licensing may be required.

需要获得相关移民及出国签证申请帮助可以联系飞出国微信(fcgvisabbs): http://flyabroad.me

以上内容由飞出国香港flyabroad.hk)整理完成,转载请保留并注明出处。


ANZSCO 3124 电子工程制图员和技术人员 ELECTRONIC ENGINEERING DRAFTSPERSONS AND TECHNICIANS - FLYabroad
#2

南澳2015年71开放担保 南澳州担保申请要求,流程及注意事项 Immigration SA State Nominated Occupation Lists

312412 Competent English (or Competent Plus overall)


#3

312412A 收入图示(Earnings) - 飞出国

312412A 职业全职从业者税前周薪比例(Income Range Per Week - Before tax)

Income of persons working full-time

312412A 职业全职与兼职从业者税前周薪比较(Income Based On Employment Status Per Week - Before tax)

Earnings of persons working full- and part-time

数据来源: abs.gov.aumyfuture.edu.au

本文由飞出国(FLYabroad @Copyright)独家整理完成,请尊重知识产权,不要以任何形式散布和传播。

What’s it like to be an Electronics Engineering Technician?

Electronics engineering technicians assist electronics engineers with
research, design, manufacturing, operation and maintenance tasks.

They may work under the direction of electronics engineers, technologists or
associates in all stages of planning, design, maintenance and production.

Electronics engineering technicians may work on radio and television
transmitters, line communication cables, computers, signalling systems,
automatic control equipment and local and wide area networks. They work in
offices, technical laboratories or workshops, or outside on offshore oil rigs
or other outdoor locations. They may also work in a team with engineers,
engineering associates and tradespeople.

How much can I expect to earn?

Full-time employed Electronics Engineering Technician earn an average of $1348
per week. The [average annual salary for this job is $70096 excluding super.]

Personal requirements

  • enjoy technical and engineering activities
  • good problem-solving and analytical skills
  • good hand-eye coordination
  • good communication skills
  • able to work independently or as part of a team
  • normal eyesight (may be corrected) and normal colour vision
  • able to work systematically.

This job also involves:

Full use of hands/fingers

Use of precision or semi-precision tools or instruments or deft hand movements
are required for these occupations. Included are jobs where poor co-ordination
or incomplete use of hands or fingers may make tasks dangerous or difficult to
undertake.

Good vision for detail

These jobs require you to be able to see clearly to examine items close-up. It
covers jobs where poor vision e.g. tunnel vision, could make the work place
unsafe or the job difficult to undertake, e.g. draftsperson working with
detailed drawings; checkout operator reading dockets; work requiring good
hand-eye co-ordination for working with precision or semi-precision tools.

Mainly indoor work

Workers performing these jobs would usually be expected to spend more than
three-quarters of their day indoors, in an office, factory or other enclosed
area protected from the weather.

Reading or writing

These jobs require moderate or better reading and writing skills. Workers may
be expected to prepare, understand or act on written materials, such as
letters or reports. People may wish to avoid these jobs if their reading or
writing English skills are limited to a small range of words or phrases and
symbols. Jobs remaining may still require very basic reading or writing
skills.

This occupation offers jobs at the following skill levels:

Para Professional Jobs

Jobs in this group usually require completion of secondary education and/or
completion of some further study of a vocational nature, such as a Diploma or
an Advanced Diploma.

Study requirements

At school, you can study these subject(s) to get a good foundation for this
occupation:

Industrial Arts

School subjects that include some aspect of INDUSTRIAL ARTS provide a useful
background to these jobs. In some cases an industrial arts-related subject is
a pre-requisite for entry to courses that provide the training for the job.

Mathematics

School subjects that include some aspect of MATHEMATICS provide a useful
background to these jobs. In some cases a mathematics-related subject is a
pre-requisite for entry to courses that provide the training for the job.

Physics

School subjects that include some aspect of PHYSICS provide a useful
background to these jobs. In some cases a physics-related subject is a pre-
requisite for entry to courses that provide the training for the job.

Duties and tasks of an Electronics Engineering Technician

Electronics engineering technicians may perform the following tasks:

  • assemble circuitry for electronic equipment in accordance with technical manuals and engineers’ instructions
  • test electronic instruments and equipment and repair or replace faulty parts
  • calibrate electronic measuring and indicating instruments according to established standards
  • install, test, repair and modify electronic equipment, including local area networks, following technical manuals or engineers’ instructions.

Specialisations

Electronics engineering technicians may specialise in fields such as aerial
surveying, communications engineering, electronics detail drafting, computer
servicing, process control or maritime electronics.


#4

ANZSCO 312412 电子工程技术员 Electronic Engineering Technician - FLYabroad

新西兰技术移民2017年2月27日最新紧缺职业奖励加分项学历要求
Bonus point requirements in 27 Febuary 2017.

紧缺职业加分要求,需符合以下资格之一:

  • 新西兰NZQF 7 学士学位或360学分以上的包含相关专业课程的更高学历,专业为新西兰电子专业
  • 新西兰NZQF 6 证书或240学分以上的包含相关专业课程的更高学历,新西兰工程文凭(6级)电子或电气(电子)的学分和知识要求
  • 工程技术学士(电子工程)或(电气与电子工程)(NZQF 7级)
  • 电子工程或电气与电子工程荣誉学士学位(NZQF 8级)
  • 华盛顿协议或悉尼协议获得电子工程学士学位(初级)工程学士学位(见附注)
  • 新西兰NZQF 7 或以上的资格,通过IPENZ的来函可以证明学位,通过任何进一步的学习达到特许专业工程师在新西兰的专业水平
  • 新西兰专业工程师协会在电子工程或电气和电子工程领域注册为特许专业工程师或工程技术专家,至少有三年的工作经验,在过去的18个月里至少有12个月的相关工作经验

附注:当协议国的大学工程学士学位通过了华盛顿协议的认定,从通过的那一刻起或之后的某段时间内必须将经过认可的大学工程学士学位发放给签字国,除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定授予的大学工程学位是否符合华盛顿协议认证,请参阅国际工程联盟在其网站上的链接:
http://www.ieagreements.org/Washington-Accord/Accredited.cfm。

如果本科工程学位获得了悉尼协议的认证,从通过的那一刻起或之后的某段时间内必须将经过认可的工程学士学位发放给签字国,除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定获得的工程技术学位是否符合悉尼协议,请参阅国际工程联盟在其网站上的链接:
http://www.ieagreements.org/Sydney/signatories.cfm。

如果本科工程学位获得了首尔协议的认证,从通过的那一刻起或之后的某段时间内必须将经过认可的工程学士学位发放给签字国,除此之外还必须将签字国的工程学士学位纳入到计划许可的名单之上。要确定授予的IT学位是否符合“首尔协议”的认证,请参阅以下链接:

One of the following:

  • A bachelor’s degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in electronics
  • A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the credit and knowledge requirements of the New Zealand Diploma in Engineering (Level 6) Electronic or Electrical (Electronic)
  • Bachelor of Engineering Technology (Electronic Engineering) or (Electrical and Electronic Engineering) (NZQF Level 7)
  • Bachelor of Engineering with Honours in Electronic Engineering, or Electrical and Electronic Engineering (NZQF Level 8)
  • A Washington Accord or a Sydney Accord accredited undergraduate (initial) engineering degree in Electronic Engineering (see Note )
  • A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New Zealand
  • NZ registration in the field of Electronic Engineering or Electrical and Electronic Engineering as a Chartered Professional Engineer or an Engineering Technologist by the Institution of Professional Engineers New Zealand AND a minimum of three years’ work experience AND a minimum of 12 months’ relevant post-qualification work experience in the last 18 months

NOTE:Where a Washington Accord accredited undergraduate engineering degree is a requirement, the engineering degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering degree awarded is Washington Accord accredited,please refer to the links from the International Engineering Alliance on their website:
http://www.ieagreements.org/Washington-Accord/Accredited.cfm.

Where a Sydney Accord accredited undergraduate engineering degree is a requirement, the engineering technology degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering technology degree awarded is Sydney Accord accredited, please refer to the links from the International
Engineering Alliance on their website:
http://www.ieagreements.org/Sydney/signatories.cfm.

Where a Seoul Accord accredited undergraduate IT degree is a requirement, the IT degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an IT degree awarded is Seoul Accord accredited, please refer to the following link:

http://www.seoulaccord.org/about.php?id=91